Inlet Manifold - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| ZZ | 9U-7087 | Tapered Cap/Plug | 1 |
| 9U-7089 | Tapered Cap/Plug | 1 | |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (6) and position crankcase breather (8) out of the way. Loosen clamp (7) and disconnect the hose assembly. Remove bolts (4) and (5). Remove bolts (1). Remove inlet manifold (2) and gasket (3) .
Show/hide table
 | |
| Illustration 1 | g01035474 |
- Remove bolt (9) and bracket (10). Remove bolts (11). Remove elbow assembly (12) and gasket (13) .
Show/hide table
 | |
| Illustration 2 | g01035495 |
Caterpillar Information System:
627F Wheel Tractor-Scraper Engine Oil Sample - Obtain
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
953C Track-Type Loader Machine Systems Communication Electronic Control Module (Product Link)
3044C Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
953C Track-Type Loader Machine Systems Muffler
AD30 Underground Articulated Truck Power Train Cover Group (Transmission)
966H and 972H Wheel Loaders Bucket Upper Pivot Bearings - Lubricate
980G Wheel Loader Bucket Lower Pivot Bearings - Lubricate
627F Wheel Tractor-Scraper Differential and Final Drive Oil Sample - Obtain
C-9 Engine for the 973C Track-Type Loader Throttle Switch Circuit - Test
953C Track-Type Loader Machine Systems Radiator
627F Wheel Tractor-Scraper Cooling System Coolant Sample - Obtain
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Install
627F Wheel Tractor-Scraper Hydraulic System Oil Sample - Obtain
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
953C Track-Type Loader Power Train Final Drive and Sprocket - Disassemble
2003/06/16 Correction to Specifications , "Synchronization Manifold" {3168}
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
834H Wheel Dozer and 836H Landfill Compactor Daily Inspection
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
834H Wheel Dozer and 836H Landfill Compactor Monitoring System
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
953C Track-Type Loader Power Train Final Drive and Sprocket - Assemble