Camshaft Bearings - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-2241     | Camshaft Bearing Tool Group     | 1     |
8H-0684 | Ratchet Wrench     | 1     |
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove the camshaft bearing from the cylinder block.
Show/hide table
Illustration 1 | g01038778 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-2241     | Camshaft Bearing Tool Group     | 1     |
8H-0684 | Ratchet Wrench     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that the bore in the cylinder block for the camshaft bearing is clean and free of debris.
- Use Tooling (A) to install the camshaft bearing in the cylinder block.
Note: Align the oil holes in the camshaft bearing and the cylinder block. The camshaft bearing should be installed to a depth that is flush with the face of the recess in the cylinder block.
Show/hide table
Illustration 2 | g01038778 |
End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
953C Track-Type Loader Machine Systems Muffler
AD30 Underground Articulated Truck Power Train Cover Group (Transmission)
966H and 972H Wheel Loaders Bucket Upper Pivot Bearings - Lubricate
980G Wheel Loader Bucket Lower Pivot Bearings - Lubricate
627F Wheel Tractor-Scraper Differential and Final Drive Oil Sample - Obtain
C-9 Engine for the 973C Track-Type Loader Throttle Switch Circuit - Test
953C Track-Type Loader Machine Systems Radiator
627F Wheel Tractor-Scraper Cooling System Coolant Sample - Obtain
953C Track-Type Loader Machine Systems Coolant Level Sensor
627F Wheel Tractor-Scraper Cooling System Coolant Sample - Obtain
953C Track-Type Loader Machine Systems Air Lines (Turbocharger)
953C Track-Type Loader Machine Systems Air Cleaner
953C Track-Type Loader Machine Systems Communication Electronic Control Module (Product Link)
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
627F Wheel Tractor-Scraper Engine Oil Sample - Obtain
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Install
627F Wheel Tractor-Scraper Hydraulic System Oil Sample - Obtain
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
953C Track-Type Loader Power Train Final Drive and Sprocket - Disassemble
2003/06/16 Correction to Specifications , "Synchronization Manifold" {3168}
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
834H Wheel Dozer and 836H Landfill Compactor Daily Inspection
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble