Illustration 1 | g00275370 |
The rotation of the shaft is counterclockwise when the rotation of the shaft is viewed from the drive end.
(1) Section for Steering System (Shaft End)
(2) Torque for the two bolts ... 11 ± 1 N·m (8 ± 1 lb ft)
(3) Section for Hydraulic System (Center Section)
Type of Pump: Vane
For the test, use SAE 10 oil that is at 65°C (150°F).
Test At Full Speed:
- Output ... 163 L/min (43 US gpm)
- Pressure ... 690 kPa (100 psi)
- Pump speed ... 2600 rpm
- Engine speed ... 2390 rpm
- Pressure ... 690 kPa (100 psi)
- Output ... 147 L/min (39 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Pump speed ... 2600 rpm
- Engine speed ... 2390 rpm
- Pressure ... 6900 kPa (1000 psi)
Test At Half Speed:
- Output ... 82 L/min (22 US gpm)
- Pressure ... 690 kPa (100 psi)
- Pump speed ... 1300 rpm
- Engine speed ... 1195 rpm
- Pressure ... 690 kPa (100 psi)
- Output ... 75 L/min (20 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Pump speed ... 1300 rpm
- Engine speed ... 1195 rpm
- Pressure ... 6900 kPa (1000 psi)
(4) Section for Brake System (Cover End)
(5) Torque for the four bolts ... 204 ± 14 N·m (150 ± 10 lb ft)
Note: For more information about the specifications for the steering pump, refer to the Service Manual module Specifications, RENR6070, "Steering System" for the machine that is being serviced.
Note: For more information about the specifications for the brake pump, refer to the Service Manual module Specifications, RENR6073, "Braking System" for the machine that is being serviced.