Illustration 1 | g00918657 |
(1) Torque for the gauge assembly ... 45 ± 6 N·m (33 ± 4 lb ft)
(2) Torque for the eight axle mounting bolts ... 1000 ± 125 N·m (740 ± 90 lb ft)
(3) Torque for the two air purge screws ... 11 ± 4 N·m (8 ± 3 lb ft)
(4) Torque for the pressure relief fitting ... 13 ± 4 N·m (10 ± 3 lb ft)
(5) Torque for the plug ... 45 ± 6 N·m (33 ± 4 lb ft)
(6) At assembly, rubber toric seals and all surfaces that contact rubber toric seals must be clean and dry. Immediately before installation, apply a thin coat of oil on the surfaces of the metal seals that contact the rubber toric seals. The seal must be assembled square with the bore. Rubber toric seals must not have bulges or twists.
(7) Torque for the 22 bolts (each side) ... 300 ± 40 N·m (220 ± 30 lb ft)
(8) Torque for the plug ... 75 ± 7 N·m (55 ± 5 lb ft)
(9) Torque for the 8 bolts ... 300 ± 40 N·m (220 ± 30 lb ft)