3500 and 3500B High Displacement Engines for Caterpillar Built Machines Caterpillar


Fuel Priming Pump - Remove and Install

Usage:

785C 1HW

拆除步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。



注意

在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。


  1. 切断发动机的燃油供应。


    图 1g00599551

  2. 拆下螺栓 (1)。

  3. 拆下螺栓 (2)。

  4. 拆下燃油充油泵 (3)。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 2g00599551

  1. 将燃油充油泵 (3)放置到位。

  2. 安装螺栓 (2)。

  3. 安装螺栓 (1)。

  4. 打开发动机的燃油供应。

Caterpillar Information System:

3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Connector Contact Description
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Drawings of Customer Installed Options
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Drive Shaft
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Service Tools
3516B Engine for Caterpillar Built Machines E071 Oil Level Add Mark
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Diagnostic Code List
D6N Track-Type Tractor Hydraulic System Visual Inspection
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Vane Pump (Implement, Pilot, Brake)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Aftercooler - Remove and Install - Aftercooler Housing with 12 bolts
2003/04/21 A New Yoke Is Now Used in the Lift Cylinder Mounts {5102, 5103, 6068, 7562}
3408E and 3412E Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
3516B Engine for Caterpillar Built Machines CAT Data Link
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
2002/12/09 A New Mounting Group and an Oil Filter Housing for the Power Train Oil are Used {3004, 3067}
AD30 Underground Articulated Truck Steering System Steering System (Pilot Oil)
AD30 Underground Articulated Truck Steering System Gear Pump (Brake and Pilot)
AD30 Underground Articulated Truck Hydraulic System Pressure Reducing Valve (Pilot Oil)
AD30 Underground Articulated Truck Engine Shutdown Switch
AD30 Underground Articulated Truck Engine Start Switch
D6N Track-Type Tractor Hydraulic System Location of Hydraulic Components
C9 Engine For Caterpillar Built Machines Engine Oil Pump - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Differential
3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.