953C Track-Type Loader Power Train Caterpillar


Hydraulic Oil Filter

Usage:

953C 2ZN

Charge




Illustration 1g00362233

(1) Pressure setting of the bypass ... 172 kPa (25 psi)

(2) After the filter contacts the gasket, tighten the filter by an additional 270 degrees.

Case Drain




Illustration 2g00362294

(1) Pressure setting of the bypass ... 160 ± 15 kPa (23 ± 2 psi)

(2) After the filter contacts the gasket, tighten the filter by an additional 270 degrees.

Caterpillar Information System:

3054 Engine Cooling System - Check
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1707 - FMI 05
3056 Engine for Caterpillar Built Machines Cooling System - Test
953C Track-Type Loader Power Train Hydrostatic Drive Pump
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Solenoid Valve (Quick Coupler)
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Fan Drive Bearing - Lubricate
3176C and 3406E Engines for Caterpillar Built Machines System Configuration Parameters
3054 Engine Cooling System - Inspect
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055} Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Solenoid Valves
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Sensors
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1707 - FMI 03
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1707 - FMI 06
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Related Components
953C Track-Type Loader Power Train Electronic Control Module Manifold
Adjustment and Modification Procedures to Alleviate Track Jumping/Indexing Adjustment and Modification Procedures to Alleviate Track Jumping/Indexing
953C Track-Type Loader Power Train Synchronization Manifold
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1708 - FMI 03
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Fuel System - Prime
621G and 627G Wheel Tractor-Scrapers Machine Systems Hydraulic Tank - Install
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1708 - FMI 05
2001/08/06 Repair for Exhaust Manifold Studs on 3306 Engines {1059}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
3054 Engine Increased Engine Oil Temperature - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.