Glow Plugs
Show/hide table
Illustration 1 | g01160570 |
(1) Bus bar (2) Glow plugs |
Voltage ... 12 Volts or 24 Volts
Tighten the glow plugs (2) to the following torque. ... 18 N·m (13 lb ft)
Caterpillar Information System:
C4.4 Marine Auxiliary Generator Set Engine Aftercooler
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
C3.3 and C4.4 Generator Sets Fuel Injection Nozzles - Remove
2005/09/26 New Fuel Transfer Pump {1256}
C4.4 Marine Generator Set Engines Fuel Injection Lines - Remove and Install
3500 Engines Low Engine Oil Pressure
2005/04/18 Replace the Gear when the Sleeve Bearing is Replaced {1212, 1234}
C2.2 Generator Sets Reference Material
C18 Marine Generator Set Voltage Connections
C280 Marine Auxiliary Engines Intermittent Low Power or Power Cutout
C18 Marine Generator Set Generator Lead Connections
G3400 Engines (EIS) Detonation Retard and Detonation Shutdown
C280 Marine Propulsion Engines Low Power/Poor or No Response to Throttle
C4.4 (Mech) Marine Generator Set MCS-3 Magnetic Pickup
C3.3 and C4.4 Generator Sets Fuel Injection Nozzles - Install
C4.4 Marine Generator Set Engines Fuel Injection Pump - Remove
C7 On-highway Engine Engine Control Module
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Electric Starting Motor
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Electric Starting Motor
C7 On-highway Engine Exhaust Manifold
2005/05/23 New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557}
C4.4 Industrial Engine Starting the Engine
TH48-E80 Petroleum Transmission Breather (Transmission) - Clean
TH48-E80 Petroleum Transmission Torque Converter and Transmission Oil Level - Check