Engine Air Filter Secondary Element - Replace
Show/hide table
NOTICE |
---|
Always replace the secondary filter element. Never attempt to reuse it by cleaning. The secondary filter element should be replaced at the time the primary element is serviced for the third time. The secondary filter element should also be replaced if the yellow piston in the filter element indicator enters the red zone after installation of a clean primary element, or if the exhaust smoke is still black. |
Show/hide table
Illustration 1 | g00772297 |
- Open the engine hood. Access the air cleaner from the left side of the machine.
Show/hide table
Illustration 2 g00281967 - Loosen the clips which hold air cleaner housing cover (1). Remove the air cleaner housing cover.
- Remove primary filter element (2) from the air cleaner housing.
Reference: For the proper procedure, refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".
Show/hide tableIllustration 3 g00864077 - Remove the secondary filter element.
Show/hide table
Illustration 4 g00864079 - Cover the air inlet opening. Clean the inside of the air cleaner housing.
- Inspect the gasket between the air inlet pipe and the air cleaner housing. Replace the gasket if the gasket is damaged.
- Uncover the air inlet opening. Install a new secondary filter element.
- Install the primary filter element and the air cleaner housing cover. Fasten the clips in order to secure the air cleaner housing cover.
- Close the engine hood.
Caterpillar Information System:
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1496 - FMI 03
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1272 - FMI 04
D8R Series II Track-Type Tractor Towing the Machine
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Support Bearing - Lubricate
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1272 - FMI 03
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1227 - FMI 04
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Spline (Center) - Lubricate
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System MID 082 - CID 1180 - FMI 06
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System MID 082 - CID 1180 - FMI 05
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System MID 082 - CID 1180 - FMI 03
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1227 - FMI 03
Underground Articulated Trucks Caterpillar Monitoring System Quad Gauge Module
2001/04/16 New VIMS V9.62X Class of Onboard Software Is Now Available {7601, 7620}
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Monitoring System (Power Train Functions)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Air Precleaner - Clean
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train General Information - Machines with Integrated Braking System
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1496 - FMI 04
525D, 535D, 545D, 555D Wheel Skidder Before Operation
2001/02/19 New Exhaust Tube Assembly {1061}
Underground Articulated Trucks Caterpillar Monitoring System Connector Contact Description of Main Display Module
Underground Articulated Trucks Caterpillar Monitoring System System Schematic
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Electronic Control Module (Power Train)
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1640 - FMI 03
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1640 - FMI 04