3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Caterpillar

Fuel Filter Base - Electric Fuel Priming Pump

Usage:

994F 442

Show/hide table




Illustration 1	g03834750

Show/hide table

Table 1
Specifications for 217-7455 Fuel Filter Base
Item	Qty	Part	Specification Description
1	2	6D-5801 Locknut	Torque to 1.7 ± 0.4 N·m (15.0 ± 3.5 lb in).
2	2	179-7267 Plug	Torque to 95 ± 10 N·m (70 ± 7 lb ft).
3	1	9S-8002 Plug	Torque to 11 ± 2 N·m (97 ± 18 lb in).
4	1	162-2222 Spring	Length under test force is 20.21 mm (0.796 inch). Test force is 1.01 ± 0.05 N (0.23 ± 0.01 lb). Free length after test is 31.75 mm (1.250 inch).
5	1	170-5146 Hollow Stud	Apply red Loctite 263 to the threads to the length (C) of 26.0 ± 0.5 mm (1.02 ± 0.02 inch). Torque to 70 ± 15 N·m (52 ± 11 lb ft).

Caterpillar Information System:

C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove

3406E, C12, C15 and C18 Marine Engines CID 0096 FMI 04 Fuel Level Sensor short to ground

3406E, C12, C15 and C18 Marine Engines CID 0096 FMI 03 Fuel Level Sensor open/short to +batt

Particulate Filter for Stationary Engines in Standby Applications{1091} Particulate Filter for Stationary Engines in Standby Applications{1091}

3500B Marine Propulsion Engines Auxiliary Water Pump - Inspect

3306B Industrial Engine Emergency Stopping

3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Install

3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Remove

3412E Petroleum Engine CID 1835 FMI 04 Auxiliary Pressure Sensor short to ground

3412E Petroleum Engine CID 1835 FMI 03 Auxiliary Pressure Sensor open/short to +batt

C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Factory Passwords

C11 and C13 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install

3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Disassemble

3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Assemble

345C Excavator Machine System Specifications Boom Cylinder

C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Install

3500B Marine Propulsion Engines Sea Water Strainer - Clean/Inspect

3500B Marine Propulsion Engines Heat Exchanger - Inspect

3176C and 3196 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor

3126B Industrial Engines E004 Engine Overspeed Shutdown

2005/01/17 Correction to Engine Speed/Timing Sensor-Calibrate {1912}

3406E, C12, C15 and C18 Marine Engines E015 High Engine Coolant Temperature Derate

3406E, C12, C15 and C18 Marine Engines E017 High Engine Coolant Temperature Warning

3126B Industrial Engines E025 High Inlet Air Temperature Derate