Bottom Guard (Rear Axle) - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
- Support guard (2) with a suitable floor jack and cribbing.
Show/hide table
Illustration 1 | g00555427 |
- Remove two bolts (1) and the washers.
- Lower the front of guard (2). Slide guard (2) toward the front of the machine in order to disengage the rear locking lug.
- Use the floor jack to remove guard (2). The weight of the guard is 20 kg (45 lb).
- Support guard (3) with a suitable floor jack and cribbing.
Show/hide table
Illustration 2 | g00555435 |
- Remove six bolts (4) and the washers from the rear of guard (3) .
- Remove six bolts (5) and the washers from the front of guard (3) .
Show/hide table
Illustration 3 | g00555436 |
- Use the floor jack to remove guard (3). The weight of the guard is 129 kg (285 lb).
Installation Procedure
- Use cribbing and a suitable floor jack to raise guard (3) into position. The weight of the guard is 129 kg (285 lb).
Show/hide table
Illustration 4 | g00555436 |
- Install six bolts (5) and the washers in the front of guard (3) .
- Install six bolts (4) and the washers in the rear of guard (3). Remove the floor jack and cribbing.
Show/hide table
Illustration 5 | g00555435 |
- Use cribbing and a suitable floor jack to raise guard (2) into position. The weight of the guard is 20 kg (45 lb).
Show/hide table
Illustration 6 | g00555427 |
- Slide guard (2) toward the rear of the machine in order to engage the locking lug.
- Install two bolts (1) and the washers. Remove the cribbing and the floor jack.
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Caterpillar Information System:
988G Wheel Loader Steering Cylinder Bearings - Lubricate
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System General Information
3408E and 3412E Engines for Caterpillar Built Machines Housing (Front) - Install
3408E and 3412E Engines for Caterpillar Built Machines Housing (Front) - Remove
988G Wheel Loader Power Train Temperature Sensor (Axle Oil)
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Hydraulic Fan System
966G and 972G Wheel Loaders Kickout and Positioner Control
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Piston Pump (Hydraulic Fan)
988G Wheel Loader Bucket Stops - Inspect/Replace
3306C Engines for Caterpillar Built Machines Compression Brake
651E and 657E Wheel Tractor-Scrapers Auger Hydraulic System General Information
3054 and 3056 Industrial and Generator Set Engines Piston Cooling Jet
3306C Engines for Caterpillar Built Machines Alternator and Regulator
SR4 HV and SR4B HV Generators Varistor - Test
836G Landfill Compactor and 834G Wheel Dozer Belts - Inspect/Adjust/Replace
834G Wheel Tractor and 836G Landfill Compactor Steering System Steering Pilot System
988G Wheel Loader Window Wiper - Inspect/Replace
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Remove
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Install
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Disassemble
D11R Carrydozer Track-Type Tractor Pitch Regenerate Solenoid Valve - Assemble
D11R Track-Type Tractor Machine Systems Ripper Shank - Remove and Install
D11R Carrydozer Track-Type Tractor Ripper Shank - Remove and Install