Front Cover - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the mating surfaces of the front housing and front cover (2).
- Install a new gasket.
- Install front cover (2) and secure the cover with ten bolts (1).
- Apply 7M-7456 Compound to the threads of stud (3). Install the nut on stud (3).
Show/hide table
Illustration 2 g00555863 - Install nut (4) and the washer. Tighten nut (4) to a torque of
35 ± 5 N·m (26 ± 4 lb ft) .
Show/hide table
Illustration 1 | g00553898 |
Typical example |
End By:
- Install the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove and Install".
Caterpillar Information System:
988G Wheel Loader Hydraulic System Oil Filter - Replace
D6R Series II Track-Type Tractor Power Train Steering and Brake Control Valve
Procedure To Install Wear Protection On Base Edges And Adapters{6800} Procedure To Install Wear Protection On Base Edges And Adapters{6800}
988G Wheel Loader Braking System Brake System Air - Purge
D9R Track-Type Tractor Power Train Case and Frame
D6R Series II Track-Type Tractor Power Train Steering Clutch and Brake
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble
525B, 535B and 545 Wheel Skidders Grapple Bank Valve (Four) (Grapple)
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Install
D7R Series II Track-Type Tractor Power Train General Information
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System General Information
826K Landfill Compactor Rollover Protective Structure (ROPS) - Inspect
988G Wheel Loader Braking System Machine Preparation for Troubleshooting
3046 Engine for Caterpillar Built Machines Connecting Rod
3054 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
SR4 HV and SR4B HV Generators Rotating Rectifier - Test
3054 and 3056 Industrial and Generator Set Engines Piston Cooling Jet
651E and 657E Wheel Tractor-Scrapers Auger Hydraulic System General Information
3306C Engines for Caterpillar Built Machines Compression Brake
988G Wheel Loader Bucket Stops - Inspect/Replace
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Piston Pump (Hydraulic Fan)