Track Arm - Remove
Removal Procedure
- Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
- Place two suitable lifting devices under the machine, as shown. Raise the machine off the ground.
Show/hide table
Illustration 1 | g00543273 |
- Remove three bolts (1), the washers and the clips that secure two lubrication lines (2) to track arm (3) and the frame. Disconnect two lubrication lines (2) from track arm (3). Remove bar (4) that secures pin (5) to the frame.
Show/hide table
Illustration 2 | g00543274 |
- Remove three bolts (6) and the washers that secure retainer (7) to pin (5). Remove retainer (7) from pin (5).
Show/hide table
Illustration 3 | g00543275 |
- Use a hammer and a brass rod to remove pin (5) that secures track arm (3) to the axle housing.
Show/hide table
Illustration 4 | g00543276 |
- Remove two bolts (8), the washers and bar (9) that secures pin (10) to the frame. Remove three bolts (11) and the washers that secure retainer (12) to pin (10). Remove retainer (12) from pin (10). Use a hammer and a brass rod to remove pin (10) from track arm (3) and the axle housing. Use two persons to remove track arm (3) from the axle housing. The track arm weighs 23 kg (51 lb).
Show/hide table
Illustration 5 | g00543277 |
Caterpillar Information System:
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
545 Wheel Skidder Power Train Drive Shaft (Machine)
611 Wheel Tractor-Scraper Power Train Transmission Oil Filter Base - Remove and Install
545 Wheel Skidder Power Train Speed Sensor (Transmission Output)
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
D8R Track-Type Tractor Power Train Transmission Pump
545 Wheel Skidder Power Train Selector and Pressure Control Valve (Transmission)
525B Wheel Skidder, 535B Wheel Skidder and 545 Wheel Skidder Grapple Piston Pump (Implement, Pilot, Steering, Brake)
545 Wheel Skidder Braking System Monitoring System
834G Wheel Dozer and 836G Landfill Compactor Power Train Torque Converter (Lockup)
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
994D Wheel Loader Air Tank Moisture and Sediment - Drain
611 Wheel Tractor-Scraper Power Train Track Arm - Install
611 Wheel Tractor-Scraper Power Train Track Arm Bearings - Remove and Install
611 Wheel Tractor-Scraper Power Train Leading Arm - Remove
611 Wheel Tractor-Scraper Power Train Leading Arm - Install
611 Wheel Tractor-Scraper Power Train Leading Arm Bearings - Remove and Install
611 Wheel Tractor-Scraper Power Train Relief Valve (Torque Converter Outlet) - Remove
611 Wheel Tractor-Scraper Power Train Relief Valve (Torque Converter Outlet) - Install
611 Wheel Tractor-Scraper Power Train Relief Valve (Torque Converter Outlet) - Disassemble
611 Wheel Tractor-Scraper Power Train Relief Valve (Torque Converter Outlet) - Assemble
611 Wheel Tractor-Scraper Power Train Selector Valve (Torque Converter Lockup Clutch) - Remove
611 Wheel Tractor-Scraper Power Train Selector Valve (Torque Converter Lockup Clutch) - Install
611 Wheel Tractor-Scraper Power Train Selector Valve (Torque Converter Lockup Clutch) - Disassemble