Speed Sensor (Transmission Output)
Show/hide table
Illustration 1 | g00541142 |
Install the sensor into the case until the sensor contacts a gear tooth. Back off the sensor from the gear tooth by a half turn. This will set the correct clearance between the sensor and the gear tooth. Tighten the locknut.
(1) Torque for final installation of the nut ... 25 ± 5 N·m (18 ± 4 lb ft)
Temperature range ... -40 to 120 °C (-40 to 250 °F)
Operating resistance ... 110 to 200 Ohms
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
D8R Track-Type Tractor Power Train Transmission Pump
545 Wheel Skidder Power Train Selector and Pressure Control Valve (Transmission)
525B Wheel Skidder, 535B Wheel Skidder and 545 Wheel Skidder Grapple Piston Pump (Implement, Pilot, Steering, Brake)
545 Wheel Skidder Braking System Monitoring System
834G Wheel Dozer and 836G Landfill Compactor Power Train Torque Converter (Lockup)
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
994D Wheel Loader Air Tank Moisture and Sediment - Drain
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Alternate Exit
963C Track-Type Loader Machine Systems Hydraulic Charge Pressure Relief Valve - Remove and Install
Adjustment of the Hydraulic Electronic Controls{5702} Adjustment of the Hydraulic Electronic Controls{5702}
611 Wheel Tractor-Scraper Power Train Transmission Oil Filter Base - Remove and Install
545 Wheel Skidder Power Train Drive Shaft (Machine)
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
611 Wheel Tractor-Scraper Power Train Track Arm - Remove
611 Wheel Tractor-Scraper Power Train Track Arm - Install
611 Wheel Tractor-Scraper Power Train Track Arm Bearings - Remove and Install
611 Wheel Tractor-Scraper Power Train Leading Arm - Remove
611 Wheel Tractor-Scraper Power Train Leading Arm - Install
611 Wheel Tractor-Scraper Power Train Leading Arm Bearings - Remove and Install
611 Wheel Tractor-Scraper Power Train Relief Valve (Torque Converter Outlet) - Remove
611 Wheel Tractor-Scraper Power Train Relief Valve (Torque Converter Outlet) - Install
611 Wheel Tractor-Scraper Power Train Relief Valve (Torque Converter Outlet) - Disassemble