Engine Oil Pressure Sensor - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
Illustration 1 | g01113562 |
(1) Engine oil pressure sensor ... 10 ± 2 N·m (88 ± 18 lb in)
Caterpillar Information System:
C12 Marine Engines Crankshaft Position Sensor - Remove and Install
Cat® Digital Voltage Regulator Parameter Viewing and Configuration (Caterpillar PC Software)
C7 and C9 On-Highway Engines Poor Acceleration or Response
C13, C15, and C18 Tier 4 Final Engines Flywheel
C12 Marine Engines Camshaft Position Sensor - Remove and Install
C12 Marine Engines Coolant Level Sensor - Remove and Install
C11 and C13 Engines Water Pump
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Relief Valve (Pilot)
3508B Engine for Caterpillar Built Machines Refrigerant Compressor
3508C, 3512C and 3516C Marine Engines Fuel Transfer Pump - Assemble
3508C, 3512C and 3516C Marine Engines Fuel Transfer Pump - Disassemble
3508C, 3512C and 3516C Marine Engines Fuel Transfer Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
345C Excavator Hydraulic System Travel Motor
345C Excavator Hydraulic System Travel Parking Brake
C12 Marine Engines Coolant Temperature Sensor - Remove and Install
345C Excavator Hydraulic System Displacement Change Valve
C11 and C13 Engines Flywheel Housing
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Accumulator (Pilot)
C27 and C32 Tier 4 Engines Engine Design
C12 Marine Engines Boost Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Remove
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Install
C12 Marine Engines Inlet Air Temperature Sensor - Remove and Install