Fuel Pressure Sensor - Remove and Install
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 断开线束组件 (1)。
- 从燃油滤清器底座上拆下燃油压力传感器 (2)。
- 从燃油压力传感器上拆下 O 形密封圈。
Show/hide table
| |
| 图 1 | g01110985 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将一个新的 O 形密封圈安装在燃油压力传感器上。
- 安装燃油压力传感器 (2) 并上紧到
10 ± 2 N·m (89 ± 18 lb in) 的扭矩。 - 连接线束组件 (1)。
Show/hide table
|
| |
| 图 2 | g01110985 |
Caterpillar Information System:
C15 and C18 Industrial Engines Fuel Temperature Sensor - Remove and Install
C11 and C13 Engines Main Bearing Journal
C11 and C13 On-Highway Engines Connecting Rod Bearing Journal
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
C11 and C13 Engines for Caterpillar Built Machines E172 High Air Filter Restriction
C6.6 Marine Generator Set Voltage Regulators
EMCP3 Engine Underspeed Warning
EMCP3 Engine Overspeed Warning
C9 Marine Generator Set Control Panel - Standard
C15 and C18 Engines for Caterpillar Built Machines CID 0248 FMI 09 Cat Data Link not communicating
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C3.3 Industrial Engine Starting the Engine
C9 Industrial Engines Electronic Control System Components
G3516C and G3516E Gas Engines Crankcase Breather
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408} Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
On-Highway Engines Electronic PTO Installation and Application Guide PTO Shutdown Timer - Test
On-Highway Engines Electronic PTO Installation and Application Guide PTO Switch Circuit - Test
G3516C and G3516E Gas Engines Fuel Lines
On-Highway Engines Electronic PTO Installation and Application Guide PTO Switch ON Lamp Circuit - Test
On-Highway Engines Electronic PTO Installation and Application Guide Remote PTO Accelerator Position Sensor Circuit - Test
On-Highway Engines Electronic PTO Installation and Application Guide 0071-14 PTO Shutdown (47)
On-Highway Engines Electronic PTO Installation and Application Guide 0030-13 PTO Throttle out of calibration (29)
On-Highway Engines Electronic PTO Installation and Application Guide 0030-08 PTO Throttle signal invalid (29)
On-Highway Engines Electronic PTO Installation and Application Guide 0231-02 J1939 Data Incorrect (58)