C11 and C13 On-Highway Engines Caterpillar


Connecting Rod Bearing Journal

Usage:

C13 JAM

Table 1
连杆轴承轴颈    
原始尺寸轴颈    
89.000 ± 0.020 mm (3.5039 ± .0008 in)    
缩小尺寸轴颈

0.508 mm (0200 in)    

88.492 ± 0.020 mm (3.4839 ± .0008 in)    
缩小尺寸轴颈

0.762 mm (0300 in)    

87.238 ± 0.020 mm (3.4346 ± .0008 in)    

新轴承和新轴颈的间隙为以下值。 ... 0.33 mm 到 0.131 mm (0.0130 in 到 0.0052 in)

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Connecting Rod
C11 and C13 Engines for Caterpillar Built Machines E172 High Air Filter Restriction
C6.6 Marine Generator Set Voltage Regulators
EMCP3 Engine Underspeed Warning
EMCP3 Engine Overspeed Warning
C9 Marine Generator Set Control Panel - Standard
C15 and C18 Engines for Caterpillar Built Machines CID 0248 FMI 09 Cat Data Link not communicating
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C3.3 Industrial Engine Starting the Engine
C12 Marine Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C6.6 Marine Generator Set Generator Lead Connections
C11 and C13 Engines for Caterpillar Built Machines CID 0248 FMI 12 Cat Data Link failed
C11 and C13 Engines Main Bearing Journal
C15 and C18 Industrial Engines Fuel Temperature Sensor - Remove and Install
C15 and C18 Industrial Engines Fuel Pressure Sensor - Remove and Install
C9 Industrial Engines Electronic Control System Components
G3516C and G3516E Gas Engines Crankcase Breather
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408} Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
On-Highway Engines Electronic PTO Installation and Application Guide PTO Shutdown Timer - Test
On-Highway Engines Electronic PTO Installation and Application Guide PTO Switch Circuit - Test
G3516C and G3516E Gas Engines Fuel Lines
On-Highway Engines Electronic PTO Installation and Application Guide PTO Switch ON Lamp Circuit - Test
On-Highway Engines Electronic PTO Installation and Application Guide Remote PTO Accelerator Position Sensor Circuit - Test
On-Highway Engines Electronic PTO Installation and Application Guide 0071-14 PTO Shutdown (47)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.