CID 1836 FMI 03 Auxiliary Temperature Sensor open/short to +batt
产生此代码的情况:
电子控制模块（ECM）检测到辅助温度传感器送来的信号电压高于正常值。
系统响应:
ECM 将会记录此诊断代码。 辅助温度会设置为缺省数值。
- 不会影响性能。
测试步骤 1. 进行以下的诊断步骤: 发动机温度传感器开路或短路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
C11 and C13 Engines Flywheel
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Electronic Service Tools
C15 and C18 Engines for Caterpillar Built Machines Flywheel
C9 On-Highway Engines Fuel System
EMCP3 Analog Input Circuit Fault
EMCP3 Service Maintenance Interval Warning
EMCP3 Generator Undervoltage Warning
EMCP3 Generator Underfrequency Warning
UPS Firmware Version 3.13 and 3.14 Update{7620} UPS Firmware Version 3.13 and 3.14 Update{7620}
3500 Engines for Caterpillar Built Generator Sets Engine Oil Temperature Sensor
3500 Engines for Caterpillar Built Generator Sets Engine Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines CID 2417 FMI 06 Ether Injection Control Solenoid current high
C-12 Generator Set Engine CID 0545 FMI 05 Ether Start Relay open/short to +batt
C-12 Generator Set Engine CID 0545 FMI 06 Ether Start Relay short to ground
EMCP3 Charging System
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Cylinder Head
C9 Engines for Caterpillar Built Machines Cooling System
EMCP3 Data Link Circuit Fault
3500 Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
3500 Generator Set Engines Valve System Components
C11 and C13 Engines Belt Tensioner
3500 Generator Set Engines Valve Lash - Adjust
C7 Urban Transit Bus Engines Welding on Engines with Electronic Controls
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism