114-2803 Pilot Valve (Oil Manifold)
Note: The pilot valve (oil manifold) in illustration 1 is for machines with an auxiliary function (logging fork, side dump bucket, multipurpose bucket, etc). Machines without an auxiliary attachment will not have attached valve body (4). 113-0282 Pilot Valve will be the designation for the valve.
Illustration 1 | g00781838 |
(1) Tighten the shuttle valve to the following torque. ... 60 ± 7 N·m (45 ± 5 lb ft)
(2) Tighten the two pressure reducing valves to the following torque. ... 5.5 ± .5 N·m (48 ± 4 lb in)
(3) Tighten the six nuts for the solenoids to the following torque. ... 20 ± 4 N·m (15 ± 3 lb ft)
(4) Tighten the six proportional solenoid valves to the following torque. ... 20 ± 5 N·m (15 ± 4 lb ft)
(5) Machines with an auxiliary attachment will have 114-9106 Valve Body.
(6) Tighten the solenoid valve to the following torque. ... 25 ± 5 N·m (18 ± 4 lb ft)
(7) Tighten the nut for the solenoid to the following torque. ... 9 ± 5 N·m (7 ± 4 lb ft)
(8) Tighten the sequence valve to the following torque. ... 60 ± 7 N·m (44.2536 ± 5.1629 lb ft )
142-3998 Pilot Valve (Oil Manifold)
Note: The pilot valve (oil manifold) in illustration 2 is for machines with an auxiliary function (logging fork, side dump bucket, multipurpose bucket, etc). Machines without an auxiliary attachment will not have attached valve body (4). 142-3997 Pilot Valve will be the designation for the valve.
Illustration 2 | g00781945 |
(1) Tighten the shuttle valve to the following torque. ... 60 ± 7 N·m (44 ± 5 lb ft)
(2) Tighten the two pressure reducing valves to the following torque. ... 60 ± 7 N·m (44 ± 5 lb ft)
(3) Tighten the locknuts for the two pressure reducing valves to the following torque. ... 13 N·m (10 lb ft)
(4) Tighten the six nuts for the solenoids to the following torque. ... 9.5 ± 1.5 N·m (7 ± 1 lb ft)
(5) Tighten the six proportional solenoid valves to the following torque. ... 20 ± 5 N·m (15 ± 4 lb ft)
(6) Machines with an auxiliary attachment will have 114-9106 Valve Body.
(7) Tighten the solenoid valve to the following torque. ... 25 ± 5 N·m (18 ± 4 lb ft)
(8) Tighten the nut for the solenoid to the following torque. ... 9.5 ± 1.5 N·m (85 ± 13 lb in)
(9) Tighten the sequence valve to the following torque. ... 60 ± 7 N·m (45 ± 5 lb ft)
(10) Tighten the locknut for the sequence valve to the following torque. ... 13 N·m (10 lb ft)