637E Series II Wheel Tractor-Scrapers Caterpillar


Transmission Oil Level - Check

Usage:

637E 1HB





Illustration 1g00455744

The transmission oil reservoir for the scraper is located on the left rear of the scraper. The reservoir is located above the left fender. A sight glass (1) is located on the reservoir.

  1. Park the machine on level ground.

  1. Lower the bowl and the apron. Place the transmission in NEUTRAL and engage the parking brake. Run the engine at low idle.

  1. Clean the sight gauge (1) and the oil filler cap (2) .

  1. Maintain the oil level between the "FULL" and the "ADD" marks on the sight gauge.

  1. Remove the oil filler cap and add oil if it is necessary.

  1. Clean the oil filler cap and install the oil filler cap.

Caterpillar Information System:

966G Wheel Loader and 972G Wheel Loader Steering System Metering Pump (Steering)
994D Wheel Loader VIMS Module Battery - Replace
994D Wheel Loader Windows - Clean
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Pump
966G Wheel Loader and 972G Wheel Loader Steering System Piston Pump (Steering)
966G Wheel Loader and 972G Wheel Loader Steering System Monitoring System
637E Series II Wheel Tractor-Scrapers Battery Disconnect Switch
631E Series II Wheel Tractor-Scrapers Transmission Oil Level - Check
966G Wheel Loader and 972G Wheel Loader Steering System General Information (Steering) - HMU Steering
902 and 906 Wheel Loaders Power Train Tire and Rim - Remove and Install
D9R Track-Type Tractor Stopping the Machine
966G Wheel Loader and 972G Wheel Loader Steering System General Information (Steering) - Command Control Steering
D8R Track-Type Tractor Gauges
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System Machine Preparation for Troubleshooting
966G Wheel Loader and 972G Wheel Loader Steering System Pilot Valve (Steering)
966G Wheel Loader and 972G Wheel Loader Steering System Check Valve (Steering Quad)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Temperature Regulator
994D Wheel Loader Window Washer Reservoir - Fill
966G and 972G Wheel Loaders Power Train Torque Converter (Freewheel Stator) - Disassemble
966G Wheel Loader and 972G Wheel Loader Steering System Steering Control Valve - Command Control Steering
966G Wheel Loader and 972G Wheel Loader Steering System Steering Control Valve - Conventional Steering
966G Wheel Loader and 972G Wheel Loader Steering System Secondary Steering System - Command Control Steering
966G Wheel Loader and 972G Wheel Loader Steering System Secondary Steering System - Conventional Steering
613C Series II Wheel Tractor-Scraper Machine Systems Pressure and Flow Compensator Valve (Secondary Steering) - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.