Illustration 1 | g00742265 |
Note: Lubricate all pins, bearings and seals with 5P-0960 Molybdenum Grease.
Illustration 2 | g00455528 |
View A-A |
(1) Diameter of the 138-2476 Pin ... 50.76 ± 0.02 mm (1.9984 ± 0.0008 inches)
Illustration 3 | g00455544 |
View B-B |
(2) Diameter of the two 138-2470 Pins ... 49.94 ± 0.02 mm (1.9661 ± 0.0008 inches)
(3) Inside diameter of the four 3T-4308 Sleeve Bearings ... 50.126 ± 0.050 mm (1.9735 ± 0.0020 inches)
Illustration 4 | g00742277 |
View C-C |
(4) Inside diameter of the two 2G-8824 Sleeve Bearings ... 44.584 ± 0.063 mm (1.7553 ± 0.0025 inches)
(5) Diameter of the two 138-2483 Pins ... 44.41 ± 0.02 mm (1.7484 ± 0.0008 inches)
(6) Use 111-4337 Washers to attain a maximum gap of 1 mm (0.04 inch). Install the 111-4337 Washers between the 9R-0158 Washer (B) and the 138-2376 Tilt Linkage (A).
Thickness of one 111-4337 Washer ... 1 mm (0.04 inch)
(7) Diameter of the 138-2485 Pin ... 50.76 ± 0.02 mm (1.9984 ± 0.0008 inches)
Illustration 5 | g00742298 |
View D-D |
(8) Inside diameter of the two 3T-4308 Sleeve Bearings ... 50.126 ± 0.050 mm (1.9735 ± 0.0020 inches)
(9) Diameter of the 138-2482 Pin ... 49.94 ± 0.02 mm (1.9661 ± 0.0008 inches)
(10) Diameter of the 170-6506 Pin ... 55.04 ± 0.02 mm (2.1669 ± 0.0008 inches)
(11) Inside diameter of the two 9R-0139 Sleeve Bearings ... 55.222 ± 0.057 mm (2.1741 ± 0.0022 inches)
Illustration 6 | g00742299 |
View E-E |
(12) Diameter of the 138-2478 Pin ... 57.12 ± 0.02 mm (2.2488 ± 0.0008 inches)
Illustration 7 | g00742300 |
View F-F |
(13) Diameter of the 138-2489 Pin ... 57.12 ± 0.02 mm (2.2488 ± 0.0008 inches)
Illustration 8 | g00742302 |
View G-G |
(14) The distance from the face of the 138-2486 Pin (17) to the side of the 138-2374 Tilt Lever (D) ... 15 ± 3 mm (0.6 ± 0.12 inch)
(15) Use 9R-4331 Spacers to attain a maximum gap of 1 mm (0.04 inch). Install the 9R-4331 Spacers between the 138-2374 Tilt Lever (C) and the Boom (D) .
- Thickness of one 9R-4331 Spacer ... 1 mm (0.04 inches)
(16) Diameter of the 138-2486 Pin ... 55.04 ± 0.02 mm (2.1669 ± 0.0008 inches)
(17) Inside diameter of the two 9R-0139 Sleeve Bearings ... 55.222 ± 0.057 mm (2.1741 ± 0.0022 inches)