994D Wheel Loader Caterpillar


Link Pin Oil Level - Check

Usage:

994D 3TZ



Ilustrasi 1g01014425

Periksalah sambungan pin terhadap adanya kebocoran. Bilamana ditemukan adanya kebocoran pada sambungan pin, periksa tinggi permukaan oli secara lebih sering untuk memastikan bahwa oli berada pada tingkat ketinggian yang benar.

ReferensiLihat padaBuku Petunjuk Pengoperasian dan Perawatan, "Oli Sambungan Pin - Ganti"untuk prosedur pengisian sambungan pin pada tinggi permukaan yang benar.

Begitu ketinggian oli untuk sambungan pin sudah tepat, operasikan alat pelengkap. Jika kebocorannya cukup besar, gantilah seal di dalam sambungan pin.

ReferensiLihat Pembongkaran dan Perakitan, RENR2038, "Sistem Alat Berat 994D" untuk prosedur membongkar sambungan pin.

Caterpillar Information System:

994D Wheel Loader Power Train Bearing End Play (Rear Pump Drive) - Adjust
IT14G Integrated Toolcarrier Creeper Speed Control - If Equipped
615C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Disassemble
994D Wheel Loader Power Train Bearing End Play (Drive Shaft Support) - Adjust
Payload Control System Owner Setup Functions
D8R Track-Type Tractor Prestart Checks
928G Wheel Loader Transmission Direction and Speed Control
D8R Track-Type Tractor Torque Divider
615C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Disassemble
615C Series II Wheel Tractor-Scraper Machine Systems Floor Roller - Install
994D Wheel Loader Power Train Transmission Pressures - Test and Adjust
623F Wheel Tractor-Scraper Hydraulic Oil Cooler - Clean
D9R Track-Type Tractor Starting with Auxiliary Start Receptacle
Installation Procedure Of The HEUI Pump Compensator Standby Plug For 3408E And 3412E Engines{1714} Installation Procedure Of The HEUI Pump Compensator Standby Plug For 3408E And 3412E Engines{1714}
631E Series II Wheel Tractor-Scrapers Hydraulic Oil Cooler - Clean - Auger
615C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Assemble
Payload Control System System Calibration
615C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Remove
627F Wheel Tractor-Scraper Windows - Clean
615C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Install
Payload Control System Normal Weighing Mode
994D Wheel Loader Cab Air Filter - Clean/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.