C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Flywheel Housing

Usage:

826K 2L3


图 1g02726366

表 1
223-4423 飞轮壳体总成的技术规格 
项目  数量  零件  技术规格说明 
安装飞轮壳体前,检查下列部件有无任何异物:飞轮壳体前表面、飞轮壳体密封垫两侧和缸体后表面。 这些部件必须没有以下物质:机油、燃油、水、密封垫粘合剂、组装固定胶和任何其他异物。 涂覆超蓝 Loctite 587 以便密封发动机油底壳、缸体和飞轮壳体之间的接合处。 
223-4903 螺栓  按照以下步骤拧紧飞轮壳体螺栓:
1.按照图 1 中所示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 100 ± 20 N·m (75 ± 15 lb ft)
2. 按照图 1 中所示的数字顺序将螺栓 10 至 23 拧紧至扭矩为 40 ± 10 N·m (30 ± 7 lb ft)
3. 再次按照图 1 中所示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)
4. 再次按照图 1 中所示的数字顺序将螺栓 10 至 23 拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 
165-3932 螺栓 
5J-5793 螺栓 
165-3930 螺栓 
338-4562 螺栓 

Caterpillar Information System:

2012/08/30 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Available for Certain Truck Engines {1052}
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pan
C9 Marine Engines and C9 Marine Generator Sets Flywheel
General Service and Repair Safety Information Safety Information
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
C15 and C18 Engines for Caterpillar Built Machines Fuel System Pressure - Test
G3408 and G3412 Engines Electric Starting Motor
C0.5 and C0.7 Industrial Engines Crushing Prevention and Cutting Prevention
2005/01/31 Tools Are Available for the Installation of Crankshaft Seals and Wear Sleeves {0700}
G3408C and G3412C Engines Emergency Stopping
G3408C and G3412C Engines Starting the Engine
G3408C and G3412C Engines Alarms and Shutoffs
C27 and C32 Engines Piston Ring Groove - Inspect
G3520B Industrial Engine Engine Speed/Timing Sensor
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat
3500B Locomotive Engines Cylinder Head Valves
C6.6 Marine Generator Set Generator Installation
3500B High Displacement Generator Set Engines Product Storage
G3520B Industrial Engine Fuel Metering Valve
2008/10/06 New Tubes for Plate Type Heat Exchangers that Are Designed To Order (DTO) {1379}
C9 Marine Generator Set Engines Gear Group (Front) - Time
G3300 Engines After Stopping Engine
C15 and C18 Tier 4 Final Engines Inlet Manifold Pressure - Test
G3520B Industrial Engine Ignition Transformers Primary Circuit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.