Fan and Piston Motor (Hydraulic Fan) - Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Attach a suitable lifting device to piston motor (3) and position piston motor (3) to fan drive assembly (9). The weight of piston motor (3) is approximately
68 kg (150 lb) . - Install bolts (13).
Show/hide table
Illustration 2 g00306397 Show/hide tableIllustration 3 g01141177 - Reposition fan drive assembly (9) on suitable blocking.
- Position fan spider assembly (10). The weight of fan spider assembly (10) is approximately
71 kg (157 lb) . The blades should be facing the downward direction, as shown. - Install bolts (11). Tighten bolts (11) to a torque of
55 ± 10 N·m (40 ± 5 lb ft) . - Install bolt (12) and the adapter. Tighten bolt (12) to a torque of
215 ± 40 N·m (160 ± 30 lb ft) .Show/hide tableIllustration 4 g01141173 Show/hide tableIllustration 5 g00306395 - Attach a suitable lifting device to piston motor (3) and position fan drive assembly (9). The weight of fan drive assembly (9) is
245 kg (540 lb) . - Install bolts (8) that fasten fan drive assembly (9) to the radiator guard assembly.
Show/hide table
Illustration 6 g01141167 - Install lower fan guard assembly (7).
- Install center fan guard assemblies (6).
Show/hide table
Illustration 7 g00306390 - Connect hose assemblies (4) to piston motor (3).
- Install clamps (5).
Show/hide table
Illustration 8 g00306389 - Use two people in order to install upper grill (2). The weight of upper grill (2) is approximately
30 kg (65 lb) .Show/hide tableIllustration 9 g00306388 - Use two people in order to install lower grill (1). The weight of lower grill (1) is approximately
25 kg (55 lb) .
Show/hide table
Illustration 1 | g01141183 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
854G Wheel Dozer Machine Systems Fan and Piston Motor (Hydraulic Fan) - Remove
627F Wheel Tractor-Scraper Parking and Secondary Brake Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Differential Pinion Preload - Adjust
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Axle Housing - Assemble
3054 Engine Air Inlet and Exhaust System
844 Wheel Dozer Safety Signs and Labels
621F, 623F and 627F Wheel Tractor-Scrapers Air System and Brakes Parking and Secondary Brake Control Valve
844 Wheel Dozer Engine Starting
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Solenoid Valve (Ride Control)
844 Wheel Dozer Tip Control
3054 Engine Muffler
994D Wheel Loader Automatic Lubrication System Visual Inspection
854G Wheel Dozer Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
3054 Engine Electrical System
854G Wheel Dozer Steering Frame Lock
854G Wheel Dozer Machine Systems Piston Pump (Hydraulic Fan) - Assemble
994 Wheel Loader Power Train Torque Converter
621F Wheel Tractor-Scraper Starting with Auxiliary Start Receptacle
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Differential Backlash and Bearings - Adjust
Caterpillar Monitoring System Senders
3054 Engine Engine Design
627F Wheel Tractor-Scraper Engine Starting with Auxiliary Start Receptacle
621F, 623F and 627F Wheel Tractor-Scrapers Air System and Brakes Retarder Air Control Valve
Caterpillar Monitoring System Switches