994 Wheel Loader Steering System Caterpillar


Steering Control

Usage:

994 9YF



Illustration 1g00284509

(1) Torque for nut ... 50 ± 4 N·m (37.0 ± 3.0 lb ft)

Note: Apply 1U-8801 Oil (Rust Preventive) to nut (1) and to the counterbore after assembly.

Note: Before assembly, pack 1P-0808 Grease into 8R-7073 Cap Assembly (2) and into 6D-5974 Roller Bearing (3) . The bearing (3) should be installed with the seal toward the bottom of cap assembly (2) .

Caterpillar Information System:

994 Wheel Loader Braking System Service Brakes
992G Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Tilt Cylinder Head End, Left Valve Dump) - Test and Adjust
966G and 972G Wheel Loaders Hood Tilt Actuator - Lubricate
992G Wheel Loader Electrohydraulic System Piston Pump Main Relief Valve Pressure (Fixed Displacement) - Test and Adjust
966G and 972G Wheel Loaders Steering Cylinder Bearings - Lubricate
992G Wheel Loader Electrohydraulic System Ride Control Signal Pressure - Check
992G Wheel Loader Electrohydraulic System Pressure Reducing Valve Pressure for Dead Engine Pilot Supply (Engine OFF) - Test and Adjust
994 Wheel Loader Braking System Brake Control Valve (Service)
Oil Renewal System Electronic Control System
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Axle Housing and Bearing Preload - Adjust
992G Wheel Loader Electrohydraulic System Piston Pump Test Mode (Variable Displacement)
3508B Engine for Caterpillar Built Machines Electronic Control System Components
627F Wheel Tractor-Scraper Safety Messages
3524B Engines for 797 and 797B Off-Highway Trucks Electronic Control Module (ECM)
613C Series II Wheel Tractor 3116 Engine Supplement Air Conditioner Accumulator - Remove and Install
966G and 972G Wheel Loaders Transmission Oil - Change
992G Wheel Loader Electrohydraulic System Piston Pump Cutoff Pressure (Variable Displacement) - Test and Adjust
938G Wheel Loader and IT38G Integrated Toolcarrier Secondary Steering
615C Series II Wheel Tractor-Scraper Mounting and Dismounting
994D Wheel Loader Steering System Filter (Steering and Brake)
627F Wheel Tractor-Scraper Before Starting Engine
994D Wheel Loader Braking System Roller Switch (Stop Light)
992G Wheel Loader Electrohydraulic System Torque Converter Stall and Variable Displacement Pump Double Stall - Test
966G and 972G Wheel Loaders Transmission Oil Filter - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.