Cooling System Level - Check
Show/hide table
 |
|
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure. |
Show/hide table
| |
| Illustration 1 | g00282344 |
Show/hide table
| |
| Illustration 2 | g00282345 |
Open the access door on the right side of the machine. The coolant level sight gauge is located on the top radiator hose.
Maintain the coolant level within the sight gauge. Add coolant, if necessary.
Note: If it is necessary to add coolant daily, inspect the cooling system for leaks.
Caterpillar Information System:
627F Wheel Tractor-Scraper Push-Pull Hydraulic System General Information
621F, 623F and 627F Wheel Tractor-Scrapers Power Train Transmission Planetary
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Brake Valve (Proportional) (Traction Control System) - Remove
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System Pressure and Flow Compensator Valve (Steering)
3508B Engine for Caterpillar Built Machines Radiator - AMOCS
966G and 972G Wheel Loaders Bucket Pivot Bearings - Lubricate
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Vane Pump (Braking) - Assemble
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Vane Pump (Braking) - Disassemble
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Torque Converter Stall - Test
938G Wheel Loader and IT38G Integrated Toolcarrier Bucket Cutting Edges - Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Ride Control Accumulator - Test and Charge
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Main Control Valve - Install
3508B Engine for Caterpillar Built Machines Dust Ejector
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Brake Valve (Proportional) (Traction Control System) - Install
3412 Generator Set Engines Electric Starting Motor
966G and 972G Wheel Loaders Cooling System Water Temperature Regulator - Replace
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Transmission Planetary
966G and 972G Wheel Loaders Drive Shaft Universal Joints - Lubricate
966G and 972G Wheel Loaders Drive Shaft Spline (Center) - Lubricate
994 Wheel Loader Steering System Steering Oil Temperature Switch
994D Wheel Loader Steering System Pressure Switch (Steering)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Pilot System Pressure - Test
994 Wheel Loader Steering System Steering Pilot Check Valve
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Hydraulic Tank - Remove