834B and 836 Landfill Compactor Caterpillar


Steering Frame Lock

Usage:

834B 7BR

------ WARNING! ------

No clearance for person in this area when machine turns. Severe injury or death from crushing could occur.

----------------------

Note: The machine must be in the straight ahead position in order to connect the steering frame lock.




Illustration 1g00038194

The steering frame lock for the 836 Landfill Compactor is located at the top of the front frame on the left side of the machine.




Illustration 2g00274562

The steering frame lock for the 834B Wheel Tractor is located at the bottom of the rear frame on the left side of the machine.




Illustration 3g00278247

Connect steering frame lock (3) when the machine is being lifted and when the machine is being transported. Also connect the steering frame lock if you are performing service work near the articulation joint. Install pin (2) and secure the pin with locking pin (1) .

Separate steering frame lock (1) before the machine is operated.




Illustration 4g00278248

Move steering frame lock (3) to the front frame and install pin (2). Secure the pin with locking pin (1).

Caterpillar Information System:

938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Ball Switch (Hydraulic Lock Detent Override)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems System Pressure - Release
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System Steering Control Valve
963C Track-Type Loader Bucket Teeth and Cutting Edges - Inspect/Replace
994D Wheel Loader Hydraulic System Gear Pump (Pump Drive Lubrication)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Steering Wheel - Remove and Install
994D Wheel Loader Hydraulic System Gear Pump (Pilot and Implement Oil Cooler)
3500B Engines Stub Shaft (Front)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Torque Converter
994D Wheel Loader Hydraulic System Liquid Level Switch (Hydraulic Tank)
3500B Engines for Caterpillar Built Power Modules Connecting Rod
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Electric Drive Pump and Electric Motor (Secondary Steering) - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Metering Pump (Steering) - Disassemble
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Metering Pump (Steering) - Assemble
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Steering Cylinder - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Electrical Components
933C and 939C HYSTAT Track-Type Loaders Windshield Washer Reservoir - Fill
3500 Engines for Caterpillar Built Generator Sets Electric Starting Motor
994 Wheel Loader Hydraulic System Piston Pump (Implement)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Steering Cylinder - Install
994D Wheel Loader Hydraulic System Relief Valve (Pilot)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Transmission Hydraulic System
966G and 972G Wheel Loaders Battery Disconnect Switch
3500B Engines Flexible Coupling
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.