Steering Wheel - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 145-5242     | Puller     | 1     |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Apply the parking brake.
- Remove horn button (1) from steering wheel (2). If necessary, use a screwdriver to pry off the horn button.
Show/hide table
Illustration 1 | g00278185 |
Show/hide table
Illustration 2 | g00278186 |
- Disconnect electrical connector (3) from horn button (1).
Show/hide table
Illustration 3 | g00278187 |
- Remove retaining nut (4) from steering wheel (2) .
Show/hide table
Illustration 4 | g00278188 |
- Use Tooling (A) to remove steering wheel (2) .
Show/hide table
Illustration 5 | g00278189 |
Installation Procedure
- Install steering wheel (2) .
Show/hide table
Illustration 6 | g00278188 |
- Install retaining nut (4). The torque for retaining nut (4) is 37 ± 7 N·m (27 ± 5 lb ft).
- Connect electrical connector (3) to horn button (1) .
Show/hide table
Illustration 7 | g00278187 |
- Install horn button (1) on steering wheel (2) .
Show/hide table
Illustration 8 | g00278185 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
994D Wheel Loader Hydraulic System Gear Pump (Pilot and Implement Oil Cooler)
3500B Engines Stub Shaft (Front)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Torque Converter
994D Wheel Loader Hydraulic System Liquid Level Switch (Hydraulic Tank)
3500B Engines for Caterpillar Built Power Modules Connecting Rod
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Electric Drive Pump and Electric Motor (Secondary Steering) - Remove and Install
994D Wheel Loader Hydraulic System Breaker Relief Valve
938G Wheel Loader and IT38G Integrated Toolcarrier Braking System Braking System Troubleshooting
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System Steering Metering Pump
973C Track-Type Loader Equipment Lowering with Engine Stopped
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Fixed Axle and Oscillating Axle
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil Level - Check
994D Wheel Loader Hydraulic System Gear Pump (Pump Drive Lubrication)
963C Track-Type Loader Bucket Teeth and Cutting Edges - Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System Steering Control Valve
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems System Pressure - Release
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Ball Switch (Hydraulic Lock Detent Override)
834B and 836 Landfill Compactor Steering Frame Lock
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Metering Pump (Steering) - Disassemble
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Metering Pump (Steering) - Assemble
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Steering Cylinder - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Electrical Components
933C and 939C HYSTAT Track-Type Loaders Windshield Washer Reservoir - Fill
3500 Engines for Caterpillar Built Generator Sets Electric Starting Motor