Correction To Power Train Systems Operation Module, RENR3044 {0374,3168,4800}
Usage:
545 (2FZ) Wheel Skidders
Reference: Service Manual Module, RENR3044, Power Train Systems Operation 545 Wheel Skidder. This module is found in Service Manual, SENR3040, 545 Wheel Skidder.
Corrections should be made to Service Manual Module RENR3044 as follows.
Power Train Systems Operation, RENR3044; "Transmission Electrical System", Page 13: The following sections of Table 4 "Normal Shifting Sequence" needs to be changed as shown below. The remainder of Table 4 "Normal Shifting Sequence" is correct.
Caterpillar Information System:
1999/09/13 Correction To Transmission And Grapple Electronic Control System, Systems Operation Testing And Adjusting, SENR6686-01 {0374,3168,4800}
1999/09/13 Water Pump Elbow Modification {1361}
1999/09/06 Improved Transmission Flow Control Valve Prevents Unstable Oil Pressure {3064}
1999/09/06 New Plate Deflects Rain Water {1417}
1999/09/06 Modification Of Governor Control Groups Eliminates Governor Sticking {1264,1265}
1999/09/06 VIMS Version 9.6X Class Of On-board Software Available {7601}
1999/09/06 Use 164-5848 Driver To Install Seals {6108}
1999/09/06 A Special Instruction For Installing Bucket Control Linkage Assembly Modifications Is Available {6107,0374}
1999/09/06 New Piston In Lift Cylinder Increases Clearance Between Tilt Lever And Axle Housing {5102,6116}
1999/09/06 New Metering Pump Provides More Precise Steering Control {4312}
1999/09/06 New Hose Assembly For Air Suspension Seats Has Improved Service Life {7312,7324}
1999/09/06 New Governor Spring Has Improved Service Life {1265}
1999/09/13 Steering Cylinder Now Uses Improved Rod Seals {4303}
1999/09/13 Hood Liner Support Brackets Modified To Eliminate Interference With Air Conditioner Compressor Switch {7251}
1999/09/13 New Connector Protects Pilot Control Valve {5059}
1999/09/13 New Cleanout Filters Available For Hydraulic Systems And Drive Trains {5068}
1999/09/13 New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13 Wider Crankshaft Gear Used {1204}
1999/09/20 Special Instruction, REHS0355, "Field Installation Of The 168-7958 Modification Arrangement" Is Available {5063,5705}
1999/09/20 Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20 New Parking Brake Actuator Adjustment Procedure Used {0374,4262,4267}
1999/09/20 Lift And Tilt Cylinder Now Uses Improved Rod Seals {5104,5102}
1999/09/20 VIMS-PC Version 2.4.3 MST Upgrade Now Available {7601,7620}
1999/09/20 VIMSpc99 Now Available {7601}