MID 018 - CID 0565 - FMI 11 Shutdown Imminent Due To Missing Desired Speed Signal
产生此代码的情况:
发生下列所有状况：
- 发动机运转。
- 进气歧管压力低于120 kPa (17 psi)。
- 图中显示的怠速/额定转速开关处于"额定转速(RATED)"""位置。
- 理想发动机转速信号缺失。
系统响应:
电子控制模块将使用一个缺省理想发动机转速信号。 诊断代码将会在电子控制模块和维修工具显示。
发动机将会继续运转。 发动机性能可能会受到不良影响。
测试步骤 1. 进行以下的诊断步骤: 理想发动机转速信号
结果:
- OK - 停止
Caterpillar Information System:
G3500 Engines MID 018 - CID 0564 - FMI 02 Noisy Desired Speed Signal
G3500 Engines MID 018 - CID 0563 - FMI 11 Loss of Desired Speed Signal
G3500 Engines MID 018 - CID 0560 - FMI 02 Cat Data Link fault
G3500 Engines MID 018 - CID 0557 - FMI 11 Oxygen Sensor Calculated Offset out of range
G3500 Engines MID 018 - CID 0556 - FMI 11 Oxygen Sensor Calculated Gain out of range
G3500 Engines MID 018 - CID 0555 - FMI 02 Noisy Oxygen signal
C9 Marine Auxiliary and Generator Set Engines Plate Locations and Film Locations
G3500 Engines MID 018 - CID 0554 - FMI 11 Oxygen Signal missing during O2 calibration step
Federal Emissions Warranty Information General Information
C9 Marine Auxiliary and Generator Set Engines Safety Messages
G3500 Engines MID 018 - CID 0553 - FMI 11 Oxygen Signal present when it should not have been
G3500 Engines Troubleshooting Data Sheet
G3500 Engines MID 018 - CID 0570 - FMI 11 Temperature Sensor Reading out of range
G3500 Engines MID 018 - CID 0576 - FMI 02 Heinzmann Actuator not controlling position
G3500 Engines MID 018 - CID 0577 - FMI 11 Heinzmann Actuator Calculated Gain out of range
Federal Emissions Warranty Information Emissions Warranty Information
G3500 Engines MID 018 - CID 0578 - FMI 11 Heinzmann Actuator Calculated Offset out of range
G3500 Engines MID 018 - CID 0590 - FMI 12 Engine Control Module malfunction
G3500 Engines MID 018 - CID 0591 - FMI 12 EEPROM checksum fault or ECM not programmed
2004/03/15 Updated Fuel Tank Caps Are Now Available {1273}
C32 Marine Engine Engine Valve Lash - Inspect/Adjust
C32 Marine Engine Piston Ring Groove - Inspect
2003/12/22 Updated Fuel Tank Caps are Now Available {1273}
G3500 Engines Cat Data Link