Variable Valve Actuator Oil Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect the harness assembly from variable valve actuator oil pressure sensor (1).
- Remove the variable valve actuator oil pressure sensor from the valve mechanism cover base. Remove the O-ring seal from the variable valve actuator oil pressure sensor.
Show/hide table
| |
| Illustration 1 | g01023396 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a new O-ring seal on the variable valve actuator oil pressure sensor. Install variable valve actuator oil pressure sensor (1). Tighten the variable valve actuator oil pressure sensor to a torque of
20 ± 2 N·m (177 ± 18 lb in) . - Connect the harness assembly to the variable valve actuator oil pressure sensor.
Show/hide table
|
| |
| Illustration 2 | g01023396 |
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Event Codes
G3406 Engines Gas Pressure Regulator
G3500B Engines Ignition Timing - Adjust
3500B and 3500B High Displacement Generator Set Engines Pistons, Rings and Connecting Rods - One-Piece Piston
3612 and 3616 Fast Vessel Engines Plate Locations and Film Locations
797F and 797F XQ Off-Highway Truck Hydraulic Fan System Pressure Reducing Valve (Hydraulic Fan)
2003/09/15 Install the Engine Oil Filter Properly {1308}
3500B and 3500B High Displacement Generator Set Engines General Information
3408C, 3412C and 3412D High Performance Marine Engines Fuel Injection Pump Housing
120H and 135H Motor Graders Machine Systems Tie Rod (Steering) - Remove and Install
3408B and 3408C Industrial and Marine Engines Fuel Ratio Control
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050} Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
C15 On-highway Engine Variable Valve Actuator Oil Pressure Solenoid - Remove and Install
2003/10/01 Improved Radiators are Available {1353}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562} Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
2003/09/01 Install the Spin-On Engine Oil Filter Properly {1308}
3600 Distillate Fuel Engines Product Lifting
2003/10/01 The Cylinder Block Has Changed {1201}
3500B and 3500B High Displacement Generator Set Engines Radiator and Cooling System - Test
3406C Marine Auxiliary Generator Set Model View Illustrations
3456 Generator Sets Generator Set Storage
3406C Marine Auxiliary Generator Set Voltage Regulators
3406C Marine Auxiliary Generator Set Starting the Engine
G3406 and G3412 Generator Sets Generator Operation