Transmission Magnetic Filter
Usage:
Remove & Install Transmission Magnetic Filter
1. Remove bolts (2) and magnetic filter cover (1).
2. Remove and inspect O-ring seal (3) on the magnetic filter cover.
3. Remove magnetic filter (4) and suction screen (5) from the housing.
NOTE: The following steps are for installation of the transmission magnetic filter.
4. Install a new suction screen (5) and new magnetic filter (4) in the housing if necessary.
5. Install a new O-ring seal (3) on the filter cover if necessary.
6. Install filter cover (1) with the bolts (2) that hold it.
Caterpillar Information System:
918F WHEEL LOADER POWER TRAIN Transmission Oil Pump
918F WHEEL LOADER POWER TRAIN Transmission
918F WHEEL LOADER POWER TRAIN Torque Converter
918F WHEEL LOADER POWER TRAIN Engine & Transmission
918F WHEEL LOADER POWER TRAIN Differential (NoSPIN)
918F WHEEL LOADER POWER TRAIN Differential (Limited Slip)
918F WHEEL LOADER POWER TRAIN Differential (Standard)
918F WHEEL LOADER POWER TRAIN Pinion Assemblies
918F WHEEL LOADER POWER TRAIN Differentials & Pinion
918F WHEEL LOADER POWER TRAIN Brake Groups
918F WHEEL LOADER POWER TRAIN Axle Shaft Assemblies
918F WHEEL LOADER POWER TRAIN Rear Support (Rear Axle Housing Group)
918F WHEEL LOADER POWER TRAIN Flow Control Valve
918F WHEEL LOADER POWER TRAIN Transmission Control Valve
918F WHEEL LOADER POWER TRAIN Rim & Tire (Front & Rear)
918F WHEEL LOADER POWER TRAIN Duo-Cone Seals (Conventional & Inverted)
918F WHEEL LOADER STEERING SYSTEM Introduction
918F WHEEL LOADER STEERING SYSTEM Hydraulic Steering Pump
918F WHEEL LOADER STEERING SYSTEM Metering Pump (Steering)
918F WHEEL LOADER STEERING SYSTEM Steering Control Group
918F WHEEL LOADER STEERING SYSTEM Pressure Switch Assembly
918F WHEEL LOADER STEERING SYSTEM Supplemental Steering Pump
918F WHEEL LOADER STEERING SYSTEM Supplemental Steering Diverter Valve
918F WHEEL LOADER STEERING SYSTEM Supplemental Steering Flow Switch