Usage:
1. Remove the floor mat and floor plate (1) in front of seat.
2. Remove four bolts (2) to disconnect manifold (3) from transmission oil filter housing.
3. Disconnect oil line (4) from transmission oil filter housing.
4. Remove four bolts (5) that hold transmission oil filter housing to the transmission. Remove transmission oil filter housing (6).
NOTE: Install in the reverse order.
Disassemble & Assemble Transmission Oil Filter (3F/3R Power Shift)
Start By:
a. remove transmission oil filter
NOTE: If only the filter bypass valve is to be removed, remove plug (2) from the cover. Remove spring (5) and valve spool (6) from the housing.
1. Drain the oil from the oil filter housing.
2. Remove bolts (1) that hold cover (3) to the housing. Remove cover (3) and the oil filter element from the housing.
3. Remove the oil filter element and the O-ring seal for the oil filter element from the cover.
4. Remove O-ring seals (4) from the housing.
5. Remove spring (5) and valve spool (6) for the filter bypass valve from the housing.
NOTE: The following steps are for the assembly of the transmission oil filter.
6. Make sure all of the parts of the transmission oil filter are clean. Inspect the O-ring seals for damage and make replacements if needed. Put clean oil on the parts.
7. Install O-ring seals (4) in the housing.
8. Install valve spool (6) and spring (5) for the filter bypass valve in the housing.
9. Install the O-ring seal and filter element on cover (3).
10. Install cover (3) on the housing.
End By:
a. install transmission oil filter