1982/03/29 Caterpillar


New Regulator Group Increases Coolant Flow To Cab Heater, Prevents Overcooling{1355}

Usage:


3208 Truck Engines ( 32Y1-Up, 40S1-Up)

SUPPLEMENT: 05/17/82

SERVICE MAGAZINE, MARCH 29, 1982, PAGE 7. In the article, "New Regulator Group Increases Coolant Flow To Cab Heater, Prevents Overcooling," the serial number given in the last sentence of the third paragraph is not correct. Change "32Y96291-Up" to "32Y92691-Up."

--------------- END SUPPLEMENT ---------------

The new 2W882 Regulator Group is available for installation in 3208 Truck Engines (32Y1-Up, 40S1-Up). Installation of the new regulator group will increase the coolant flow to the cab heater and will prevent engine overcooling (operation at temperatures below normal) during cold weather.

The components of the 2W882 Regulator Group are shown in the chart.

Some engine modifications are necessary. On engines 40S1-Up and 32Y1-32Y92690, the shunt hose must be moved to a different location and new components installed to prevent reverse coolant flow. On engines 32Y92691-Up, the shunt line changes are not necessary.

Modification of some 8N2581 or 8N2598 Regulator Housing Covers will be necessary to get clearance for the regulator bypass washer.

There are two errors in the Special Instruction that must be corrected. Change "32Y92501-Up, to "32Y92691-Up" in the note on Page 1. In Step 2 on Page 1, change "32Y1-32Y8137" to "32Y1-32Y81371."

Caterpillar Information System:

1982/03/29 Multi-Piece Wheel Rims; Caution Must Be Used{4202,4201}
1982/03/29 Flywheel Adapters For Dynamometer Testing{1156,0652}
1982/03/29 Location Of Sending Unit Changed To Improve Accuracy Of Water Temperature Indication{7453}
1982/03/29 Parts Book Changes{0374}
1982/03/22 Improved Plunger And New Spring Used In Mechanical Shutoff Group{7418}
1982/03/22 Use FT1614 Cover To Protect Center Shaft Assembly{0622,3305,3306,3302,3307}
1982/03/22 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22 Caterpillar Electric Starting Motors{1453,1407}
1982/03/22 Use 5P5195 Fuel Line Wrench Correctly{0612,1252}
1982/03/22 Improved Valve Cover Seal Used{1107}
1982/03/22 Engine Replacement{1000}
1982/03/22 Use Correct Torque On Hydraulic Valve Bolts, Nuts And Taperlock Studs{5050}
1982/03/29 Twisted Port Plate Can Cause Excessive Case Drain From Piston Pump Or Motor{5058,5070}
1982/04/05 Lubricant Recommendations Have Been Changed For Vehicular Products{0680,0374,0375,3004,1318,5060}
1982/04/05 Conversion Of 49-State 3406 Truck Engine From 283 kW (380 hp) To 298 kW (400 hp) Arrangements{1000}
1982/04/05 Reminder: Check Valve Lash Adjustment At Correct Intervals{1102}
1982/04/12 Pressure Regulator Group Now Available For Parts Service{3152,3185,3166,3012}
1982/04/12 Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12 Lock Screw For Threaded Crown On Hydraulic Cylinders No Longer Used{5000}
1982/04/12 Make Sure Hydraulic Pumps Are Installed Correctly{5055,5070,5073}
1982/04/12 New Seals Improve Pressure Regulator Group{3185,3012}
1982/04/12 Use Correct Size Bolt To Install 5P9736, 6V2156 Or 6V2157 Link Brackets{0644}
1982/04/19 Improvements Made To 6V3000 Sure Seal Repair Kit{0611,1408}
1982/04/19 New Broken Link Spring Used In Governor{1264}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.