Main Bearing Journal
Show/hide table
| Diameter of Crankshaft Journal (Bearing Surface) For Main Bearings | |
| Original Size Journal (1) | 77.955 to 77.970 mm (3.0691 to 3.0697 inch) |
| Undersize Journal 0.25 mm (0.010 inch) |
77.705 to 77.720 mm (3.0592 to 3.0598 inch) |
| Undersize Journal 0.50 mm (0.020 inch) |
77.455 to 77.470 mm (3.0494 to 3.0500 inch) |
| Undersize Journal 0.75 mm (0.030 inch) (2) |
77.205 to 77.220 mm (3.0396 to 3.0402 inch) |
Show/hide table
| ( 1 ) | Regrind the main bearing journals to the next undersize dimension if the repair limit of 77.850 mm (3.0650 inch) is exceeded. |
| ( 2 ) | Service limit 77.100 mm (3.0354 inch) |
The clearance between a new main bearing and a new main bearing journal is the following value. ... 0.050 to 0.110 mm (0.0020 to 0.0043 inch)
Caterpillar Information System:
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
G3304 and G3306 Engines Turbocharger - Assemble
Installation Guide for Industrial Electronic Engine Displays Messenger - Test
3054E Industrial Engine Alternator - Install
2012/10/01 Procedure for Disassembly and Assembly of the Pressure Relief Valve in Certain C32, G3500, 3500. 3600, and C280 Engines {5117}
G3520C and G3520E Generator Set Engines Aftercooler - Install
G3520C and G3520E Generator Set Engines Aftercooler - Remove
2003/06/09 New Software Released for Machine Security System (MSS) {7620}
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Nozzles
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Transfer Pump
C1.5 and C2.2 Generator Troubleshooting
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Install
C4.4 Industrial Engine Engine Oil Level - Check
C3.3 and C4.4 Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
3054E Industrial Engine Fuel Injection Pump - Remove
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Remove
3456 Generator Sets Generator Description
G3520C and G3520E Generator Set Engines Throttle Control Valve - Remove
G3520C and G3520E Generator Set Engines Throttle Control Valve - Install
3456 Generator Sets Generator Identification
3500B and 3500C Marine Propulsion Engines Engine Monitoring System
3500B Engines for Caterpillar Built Power Modules Thermostatic Valve
3456 Generator Sets Generator Installation
C1.5 and C2.2 Generator Set Engines Fuel Injection Lines - Remove and Install