3500 Spark Ignited Engines Caterpillar

Cylinder Head Valves

Usage:

G3508 2JF

Show/hide table




Illustration 1	g03200205
Typical example

Show/hide table

Table 1
Specification for 212-0940 Cylinder Head Gp and 378-7414 Cylinder Head Gp
Item	Qty	Part	Specification Description
1	4	7N-1904 Spring	Length under test force is 56.36 mm (2.219 inch). Test force is 245 ± 25 N (55 ± 6 lb). Free length after test is 62.50 mm (2.461 inch).
2	4	7N-1903 Spring	Length under test force is 45.49 mm (1.791 inch). Test force is 125 ± 12 N (28 ± 3 lb). Free length after test is 51.54 mm (2.029 inch).
A	2	7N-1902 Dowel	Extension is 66.50 ± 1.00 mm (2.618 ± 0.039 inch).
B	-	-	Height from the top of the cylinder head to the top of the valve guides is 26.0 ± 1.0 mm (1.02 ± 0.04 inch).
3	2	255-0897 Valve Guide	Bore of the exhaust valve guide before installation is 9.481 ± 0.008 mm (0.3733 ± 0.0003 inch).
4	2	191-6766 Valve Guide	Bore of the inlet valve guide before installation is 9.481 ± 0.008 mm (0.3733 ± 0.0003 inch).
5	2	307-4641 Exhaust Valve	Before assembly, coat the exhaust valve stems with clean engine oil. Stem diameter (C) is 9.441 ± 0.010 mm (0.3717 ± 0.0004 inch). Valve diameter (E) is 56.00 ± 0.15 mm (2.205 ± 0.006 inch). Face angle is 70.75 ± 0.25 degrees.
6	2	210-2542 Inlet Valve	Before assembly, coat the inlet valve stems with clean engine oil. Stem diameter (D) is 9.441 ± 0.010 mm (0.3717 ± 0.0004 inch). Valve diameter (F) is 56.00 ± 0.15 mm (2.205 ± 0.006 inch). Face angle is 19.40 ± 0.25 degrees.
7	2	191-6760 Valve Seat Insert	Diameter of exhaust valve seat insert is 60.132 ± 0.015 mm (2.3674 ± 0.0006 inch). Bore in the cylinder head is 60.000 ± 0.025 mm (2.3622 ± 0.0010 inch). Face angle is 20.25 ± 0.25 degrees.
8	2	266-8718 Valve Seat Insert	Diameter of inlet valve seat insert is 60.640 ± 0.015 mm (2.3874 ± 0.0006 inch). Bore in the cylinder head is 60.508 ± 0.025 mm (2.3822 ± 0.0010 inch). Face angle is 20.25 ± 0.25 degrees.

Caterpillar Information System:

C9 Urban Transit Bus Engine 0111-01 Low Coolant Level Warning (62)

3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Disassemble

C9 Urban Transit Bus Engine Alternator - Test

3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Assemble

3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules

UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Model View Illustrations - Illustrations of the Cabinets and Multiple Module Units

SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Connection Diagrams for Schematic Codes 30XXXX

UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Menus

2002/09/23 A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}

2002/09/01 A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}

C9 Urban Transit Bus Engine Smart Idle Parameters

C-10 and C-12 Truck Engines Electronic Control System Components

C9 Urban Transit Bus Engine 0111-11 Very Low Coolant Level (62)

C9 Urban Transit Bus Engine Timer Parameters

C9 Urban Transit Bus Engine Engine Monitoring Parameters

CB22, CB24, CB32 and CC24 Vibratory Utility Compactors Machine Systems Graphic Color Codes

2002/09/01 The 219-7241 Fumes Disposal Filter Group Is Available For Field Installation {1074}

C-15, C-16, and C-18 Engines Basic Engine

3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Assemble

3406E Truck Engine Slave Piston Lash - Adjust

C9 Urban Transit Bus Engine Maintenance Parameters

C9 Urban Transit Bus Engine Trip Parameters

C9 Urban Transit Bus Engine Input Selections

G3500 Engines Turbocharger