Turbocharger - Remove
Start By:
- Remove the boost control valve. Refer to Disassembly and Assembly, " Boost Control Valve - Remove".
- Remove the air cleaner. Refer to Disassembly and Assembly, " Air Cleaner - Remove".
- Remove coupling (2) and the seals from turbocharger (1).
Show/hide table
Illustration 2 g00992665 - Loosen clamp (5) and remove exhaust elbow (4). Remove the clamp from support (3).
- Remove the bolts and the nuts that hold support (3) to the exhaust manifold.
Show/hide table
Illustration 3 g00992669 - Remove the support and coupling (6).
- Remove the seal rings from coupling (6).
- Remove oil supply tube (7) and the gasket.
Show/hide table
Illustration 4 g00992672 - Remove bolts (9) and the washers. Disconnect oil drain line (8) from the turbocharger.
Show/hide table
Illustration 5 g00992673 - Remove four nuts (10). Remove turbocharger (1) and the gasket from the exhaust manifold.
Show/hide table
Illustration 6 g00992676 - Remove oil drain tube (8) and the O-ring seal.
Show/hide table
Illustration 1 | g00992662 |
Caterpillar Information System:
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Connection Diagrams for Schematic Codes 11XXXX
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Connection Diagrams for Schematic Codes 10XXXX
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Basic Connection Diagrams
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Abbreviations
C9 Urban Transit Bus Engine Alternator and Regulator
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Specific Connection Diagrams
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Reference Information
3054E Industrial Engine Gear Group (Front)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Disassemble
3054E Industrial Engine Front Housing and Covers
3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
C9 Engine For Caterpillar Built Machines Engine Oil Pump - Remove
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Connection Diagrams for Schematic Codes 12XXXX
G3304 and G3306 Engines Turbocharger - Install
C11, C13 and C15 On-highway Engines 0001-05 Cylinder #1 Injector current low (72)
C11, C13 and C15 On-highway Engines 0001-06 Cylinder #1 Injector current high (72)
C11, C13 and C15 On-highway Engines 0002-05 Cylinder #2 Injector current low (72)
C11, C13 and C15 On-highway Engines 0002-06 Cylinder #2 Injector current high (72)
C11, C13 and C15 On-highway Engines 0003-05 Cylinder #3 Injector current low (73)
C11, C13 and C15 On-highway Engines 0003-06 Cylinder #3 Injector current high (73)
C11, C13 and C15 On-highway Engines 0004-05 Cylinder #4 Injector current low (73)
C11, C13 and C15 On-highway Engines 0004-06 Cylinder #4 Injector current high (73)
C11, C13 and C15 On-highway Engines 0005-05 Cylinder #5 Injector current low (74)
C11, C13 and C15 On-highway Engines 0005-06 Cylinder #5 Injector current high (74)