Makeup Oil Tank - Fill
If the control panel is indicating that the oil is low, perform the following steps:
- Shut down the power module according to the instructions in this Operation and Maintenance Manual, "Manual Stop Procedure".
- Put the control switch in the "OFF" position and attach a "DO NOT OPERATE" or similar warning tag.
- Open the rear doors and lock in position.
- Use a ladder to reach the left panel on the structure that supports the radiator. Open the panel.
- Remove the filler cap and fill the tank.
- Clean the filler cap and install the filler cap.
- Close the panel. Close and secure the rear doors.
- Store the ladder and remove the "DO NOT OPERATE" tag.
- Power up the power module according to the instructions in this Operation and Maintenance Manual, "Starting the Engine".
Caterpillar Information System:
PMG3516 Power Module Engine Oil - Change
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper
2002/08/01 A New Turbocharger Group Includes An Improved Turbine Housing {1052}
PMG3516 Power Module Engine Oil Filter - Change
3054E Industrial Engine Water Pump
3054E Industrial Engine Crankshaft - Steel Crankshaft
3054E Industrial Engine Glow Plugs
3054E Industrial Engine Crankshaft Pulley
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
C-10, C-12 and C-15 On-highway Engines 0032-11 Turbo Wastegate Solenoid current mismatch
C-10, C-12 and C-15 On-highway Engines 0032-06 Turbo Wastegate Solenoid current high
C-10, C-12 and C-15 On-highway Engines 0032-05 Turbo Wastegate Solenoid current low
3054E Industrial Engine Engine Oil Filter
C15 and C18 Petroleum Generator Sets Generator Set Vibration - Test/Record
3054E Industrial Engine Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
PMG3516 Power Module Methane Gas Detector
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Bio-Gas
2002/09/01 The Torque and the Number of Bolts for Mounting the Flywheel to the Crankshaft has Changed {1202}
C-10, C-12 and C-15 On-highway Engines Engine Speed/Timing Sensor - Calibrate
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Fuel Filtration
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Propane
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Hydrogen Sulfide Effects on Engine Maintenance Costs
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Trunnion - Remove and Install