0032-11 Turbo Wastegate Solenoid current mismatch
Conditions Which Generate This Code:
The ECM detects the following conditions:
- There is a short circuit to the +Battery in the circuit for the wastegate solenoid for at least two seconds.
System Response:
The check engine lamp will turn on once the diagnostic code has been active for one minute.
Factory passwords are required to clear this diagnostic code.
The engine will be derated while this diagnostic code is active.
Test Step 1. Perform the following diagnostic procedure: Wastegate Solenoid - Test
Results:
- OK - STOP
Caterpillar Information System:
C-10, C-12 and C-15 On-highway Engines 0032-06 Turbo Wastegate Solenoid current high
C-10, C-12 and C-15 On-highway Engines 0032-05 Turbo Wastegate Solenoid current low
3054E Industrial Engine Engine Oil Pressure Sensor
3054E Industrial Engine Boost Pressure Sensor
3054E Industrial Engine Electronic Control Module
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
PMG3516 Power Module Product Storage
3054E Industrial Engine Coolant Temperature Sensor
3054E Industrial Engine Inlet Manifold Temperature Sensor
2002/08/01 Checking The Contents Of A Used Oil Filter And Checking The Backlash Of the Front Idler Gears Can Result In Improved Bearing Life For The Front Idler Gears {1308}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electronic Service Tools
3054E Industrial Engine Speed/Timing Sensor
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
3054E Industrial Engine Crankshaft Pulley
3054E Industrial Engine Glow Plugs
3054E Industrial Engine Crankshaft - Steel Crankshaft
3054E Industrial Engine Water Pump
PMG3516 Power Module Engine Oil Filter - Change
2002/08/01 A New Turbocharger Group Includes An Improved Turbine Housing {1052}
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper
PMG3516 Power Module Engine Oil - Change
PMG3516 Power Module Makeup Oil Tank - Fill
3054E Industrial Engine Engine Oil Filter
C15 and C18 Petroleum Generator Sets Generator Set Vibration - Test/Record