Usage:
start by:
a) remove valve cover
1. Remove glow plug wiring harness (1).
2. Remove the glow plugs (4). See REMOVE GLOW PLUGS.
3. Remove fuel injection lines (2) with tooling (A) and (B).
4. Remove fuel injection valve nut (3).
5. Remove valve body (5) and nozzle from the precumbustion chamber.
6. Remove nozzle (6) from body (5).
Install Fuel Injection Valves
1. Install nozzle (3) finger tight on body (2).
2. Install the valve body and nozzle in the precombustion chamber.
3. Install fuel injection valve nut (1) in the precombustion chamber. Tighten the nut to a torque of 55 ± 5 lb.ft. (75 ± 7 N·m).
4. Install the fuel injection lines. Tighten the nuts to a torque of 30 ± 5 lb.ft. (40 ± 7 N·m) with tooling (A) and (B).
5. Install glow plugs (4). See INSTALL GLOW PLUGS.
6. Install the glow plug wiring harness.
end by:
a) install valve cover