Swing Gear and Bearing
Show/hide table
| |
| Illustration 1 | g03717649 |
|
Top view | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| - | Position “S” that is on inner race (10) relative to the carbody (2) and bearing stopper (1). Refer to Illustration 1 for the correct orientation of the races. | ||
| 3 | 1 | 4I-7512 Hose Clamp | Torque to |
| 4 | 8 | 455-3798 Bolt | Before assembly, apply blue Loctite 243 to the threads. |
| Torque to |
|||
| 5 | 4 | 455-3798 Bolt | Before assembly, apply blue Loctite 243 to the threads. |
| Torque to |
|||
| 6 | - | - | Before assembly, apply 8C-8422 Sealant between the mating surfaces of the gear group and the upper frame assembly and between gear group and carbody assembly. Sealant must be applied to each inward mating surface from bolt hole pitch circle diameter and keep tracking continuously. |
| 7 | 2 | 457-8759 Bolt | Before assembly, apply blue Loctite 243 to the threads. |
| Torque to |
|||
| 8 | 32 | 461-3880 Bolt | Before assembly, remove compound, oil and dust from bolts, washers and female threads, then apply Loctite C5A Copper Anti-Seize Compound to the threads. |
| Use the following tightening procedure: | |||
| Tighten bolts to |
|||
| Turn to an additional angle of 70 ± 5 degrees. | |||
| 9 | 36 | 461-3878 Bolt | Before assembly, remove compound, oil and dust from bolts, washers and female threads, then apply Loctite C5A Copper Anti-Seize Compound to the threads. |
| Use the following tightening procedure: | |||
| Tighten bolts to |
|||
| Turn to an additional angle of 45 ± 5 degrees. | |||
| 11 | 1 | 095-7993 Dowel | Before assembly, apply Loctite C5A Copper Anti-Seize to the dowel holes. |
Caterpillar Information System:
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Pilot Lines
318D2 Excavator Machine System Specifications Hydraulic Tank Mounting
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Radiator and Hydraulic Oil Cooler
BA118C (Manual Angling) and BA118C (Hydraulic Angling) Angle Brooms (84 Inch) Gerotor Motor (Broom)
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Hydraulic Tank and Filter
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Bucket Lines
318D2 Excavator Machine System Specifications Hydraulic Tank and Filter
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Hydraulic Cylinder - Thumb
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Coupler Lines
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Coupler Lines
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Stick Cylinder
2014/11/03 An Improved Swashplate for the Travel Motor is now used on Certain 305.5E, 306, and 306E Mini Hydraulic Excavators {4050}
312D2, 313D2 and 318D2 Excavators Tool Control System Monitor Overview
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Hoist Solenoid Valve
2014/08/29 An Improved Plate is now Available for Certain M313D and M315D Wheeled Excavators {1050, 108D}
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Parameter - Test
BP115C (60 Inch) and BP118C (72 Inch) Pickup Brooms Brooms
BA118C (Manual Angling) and BA118C (Hydraulic Angling) Angle Brooms (84 Inch) Hydraulic Cylinder
323F Excavator Diagnostic Trouble Codes
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Solenoid Valve (Switch Controlled) - Test
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Sprocket
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Air Conditioning E13 - Ambient Air Temperature Sensor (Open Circuit)
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Travel Motor and Mounting
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Air Conditioning E14 - Ambient Air Temperature Sensor (Short Circuit)