Hydraulic Tank and Filter
Show/hide table
| |
| Illustration 1 | g03224616 |
|
Rear view | |
Show/hide table
| Specification for 454-7359 Hydraulic Tank and Filter Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 207-6403 Plug | Torque to |
| 2 | 8 | 8T-4184 Bolt | Torque to |
| 3 | 3 | 8T-4136 Bolt | Torque to |
| 4 | 4 | 8T-4908 Bolt | Torque to |
| 5 | 1 | 164-5590 Fluid Sampling Valve As | Torque to |
| 6 | 1 | 129-3400 Guard | Apply Loctite spray adhesive. |
| 7 | 1 | 7B-3039 Spring | Length under test is Test force is Free length after test is |
| 8 | 4 | 170-8553 Bolt | Torque to |
| 9 | 1 | 315-4441 Pressure Switch | Torque to |
| 10 | 1 | 9J-7031 Drain Plug | Torque to |
| 11 | 2 | 7K-1181 Cable Strap | Sharp corners at the cutting edge of each cable strap shall not be allowed. |
| 12 | 1 | 432-6291 Temperature Sensor | Torque to |
Show/hide table
| |
| Illustration 2 | g03224619 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 13 | 1 | 164-5567 Quick Disconnect Coupler As | Torque to |
| 14 | 1 | 347-6081 Sight Gauge Gp | The threads of the bosses must be clean before mounting the sight gauge group. |
| Torque two 236-3259 Special Bolts of the sight gauge group to |
Show/hide table
| |
| Illustration 3 | g03224637 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 15 | - | - | Tighten to |
| 16 | - | - | Apply red Loctite 271 to the mating surface.
Tighten to |
Show/hide table
| |
| Illustration 4 | g03224639 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 17 | 1 | 095-6639 Spring | Length under test is Test force is Free length after test is |
| 18 | 1 | 8T-4133 Nut | Torque to |
| 19 | 1 | 8T-4133 Nut | Torque to |
Caterpillar Information System:
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Hydraulic Cylinder - Thumb
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Coupler Lines
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Coupler Lines
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Stick Cylinder
2014/11/03 An Improved Swashplate for the Travel Motor is now used on Certain 305.5E, 306, and 306E Mini Hydraulic Excavators {4050}
Rework Procedure for the Travel Motor Swashplate on Certain 305.5E, 306, and 306E Mini Hydraulic Excavators{4050} Rework Procedure for the Travel Motor Swashplate on Certain 305.5E, 306, and 306E Mini Hydraulic Excavators{4050}
Installation Procedure for 455-2652 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators{1408} Installation Procedure for 455-2652 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators{1408}
312D2, 313D2 and 318D2 Excavators Tool Control System Service Mode - Enter
An Incorrect Fuse Film Panel May be Present on Certain 305.5E Mini Hydraulic Excavators{1408, 7451} An Incorrect Fuse Film Panel May be Present on Certain 305.5E Mini Hydraulic Excavators{1408, 7451}
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Air Conditioning E12 - Intake Air Temperature Sensor (Short Circuit)
New Cab Harness Assembly Is Now Used on Certain Wheeled Material Handlers {1408} New Cab Harness Assembly Is Now Used on Certain Wheeled Material Handlers {1408}
M318F, M320F and M322F Wheeled Excavators Hydraulic System Stick Hydraulic System
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Bucket Lines
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Hydraulic Tank and Filter
BA118C (Manual Angling) and BA118C (Hydraulic Angling) Angle Brooms (84 Inch) Gerotor Motor (Broom)
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Radiator and Hydraulic Oil Cooler
318D2 Excavator Machine System Specifications Hydraulic Tank Mounting
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Pilot Lines
318D2 Excavator Machine System Specifications Swing Gear and Bearing
312D2, 313D2 and 318D2 Excavators Tool Control System Monitor Overview
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Hoist Solenoid Valve
2014/08/29 An Improved Plate is now Available for Certain M313D and M315D Wheeled Excavators {1050, 108D}
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Parameter - Test
BP115C (60 Inch) and BP118C (72 Inch) Pickup Brooms Brooms