312F and 313F Excavators Machine Systems Caterpillar


Refrigerant Receiver-Dryer - Remove and Install

Usage:

312F GC FKE

Removal Procedure

    ------ WARNING! ------

    Personal injury can result from contact with refrigerant.

    Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

    Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

    Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

    Personal injury or death can result from inhaling refrigerant through a lit cigarette.

    Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

    Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

    Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.


  1. Recover the refrigerant. Refer to Service Manual, SENR5664, ""All Products Air Conditioning and Heating R-134a for All Caterpillar Machines" " for the recovery and charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.


    Illustration 1g03709119

  2. Open access door (1) on the left side of the machine.


    Illustration 2g03709156

  3. Disconnect tube assemblies (2) and (3).

  4. Remove clamps (4). Remove refrigerant receiver-dryer (5).

Installation Procedure

  1. Install refrigerant receiver dryer (5) in the reverse order of removal.

Caterpillar Information System:

308E2 CR and 308E2 SR Mini Hydraulic Excavators Machine System Specifications Return Lines
2014/08/13 Improved Paddle Plate to Edge Welds on 361-5001 Rock Bucket Gp {0679, 6001, 6102, 6801}
308E2 CR and 308E2 SR Mini Hydraulic Excavators Machine System Specifications Front Lines
308E2 CR and 308E2 SR Mini Hydraulic Excavators Machine System Specifications Air Cleaner
PM820, PM822, and PM825 Cold Planer Water Tank Strainer - Clean and Inspect
PM310, PM312, and PM313 Cold Planer Water Spray System Strainer - Clean
2014/11/14 A New Slow Return Check Valve is Now Available for Certain 320E to 336F Excavators {5067}
PM820, PM822, and PM825 Cold Planer Water Spray System Fluid Level - Check
312F and 313F Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
PM820, PM822, and PM825 Cold Planer Water Spray System - Inspect
318D2 Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Calibrate - Power Shift Pressure
PM820, PM822, and PM825 Cold Planer Water Spray Nozzles - Clean
C4.4 Engines for Caterpillar Built Machines Injector (Diesel Exhaust Fluid)
C4.4 Engines for Caterpillar Built Machines Manifold (Diesel Exhaust Fluid)
307E2 Mini Hydraulic Excavator Monitoring System
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (DPF Inlet)
312F and 313F Excavators Machine Systems Seat - Remove and Install
PM820, PM822, and PM825 Cold Planer Operator Controls - Ground Control Stations
Installation of the 452-6912 Auxiliary Hydraulic Lines Gp (Medium Pressure) on Certain 390F Hydraulic Excavators {5057} Installation of the 452-6912 Auxiliary Hydraulic Lines Gp (Medium Pressure) on Certain 390F Hydraulic Excavators {5057}
312F and 313F Excavators Machine Systems Check Valve (Cooler Bypass) - Remove and Install
336F XE Excavator Machine System Main Pump (Flow) - Test - Hydraulic Power
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.