BR624 Work Tool Caterpillar


Maintenance Interval Schedule

Usage:

BR624 HM3
Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.

The user is responsible for the following items: performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters and the replacement of components due to normal wear and aging . Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.

Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.

Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.

Note: If Cat HYDO Advanced 10 hydraulic oil is used, the hydraulic oil change interval will change. The normal interval of 2000 hours is extended to 3000 hours. S·O·S services may extend the oil change to a longer interval. Consult your Cat dealer for details.

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.

The user is responsible for the following items: performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters and the replacement of components due to normal wear and aging . Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.

Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.

Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.

Note: If Cat HYDO Advanced 10 hydraulic oil is used, the hydraulic oil change interval will change. The normal interval of 2000 hours is extended to 3000 hours. S·O·S services may extend the oil change to a longer interval. Consult your Cat dealer for details.

When Required

Blade - Inspect/Replace
Blade Bolt - Check/Tighten

Every 4 Service Hours or Twice Daily

Frame Mounting Bracket - Inspect

Initial 8 Service Hours

Blade - Inspect/Replace
Blade Bolt - Check/Tighten

Every 8 Service Hours or Daily

Coupling - Lubricate
Rotor Bearing - Lubricate

Caterpillar Information System:

M318F, M320F and M322F Wheeled Excavators Hydraulic System Electronic Control (Pilot System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Location of Components (Pilot System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System General Information (Pilot System)
336F Excavator Solenoid Return - Test
M318F, M320F and M322F Wheeled Excavators Hydraulic System Electronic Control (Machine System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Location of Components (Machine System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System General Information (Machine System)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Oscillating Axle (Rear) - Remove and Install
318D2 Excavator Systems Main Hydraulic System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Flood Lamp
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Refrigerant Compressor - Remove and Install
A New Strap is Now Used to Reduce Vibration of the Glow Harness on Certain 303E CR Mini Hydraulic Excavators {1408} A New Strap is Now Used to Reduce Vibration of the Glow Harness on Certain 303E CR Mini Hydraulic Excavators {1408}
M318F, M320F and M322F Wheeled Excavators Hydraulic System Pilot Hydraulic System
M318F, M320F and M322F Wheeled Excavators Hydraulic System Pilot Valve (Pilot Manifold)
MR-244 Work Tool Maintenance Interval Schedule
M318F, M320F and M322F Wheeled Excavators Hydraulic System Accumulator (Pilot)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Pilot Valve (Joystick)
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
M318F, M320F and M322F Wheeled Excavators Hydraulic System Solenoid Valve (Oscillating Axle)
336D2 XE Excavator Operator Controls
M318F, M320F and M322F Wheeled Excavators Hydraulic System Solenoid Valve (Heavy Lift)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Implements and Swing Controls Alternate Patterns - If Equipped
421-1011 Valve Recession Tool Group used on G3500 C, E, ; H Engines{0374, 0599, 0701, 0703, 1100} 421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Refrigerant Condenser - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.