Crankcase Breather
Show/hide table
 | |
| Illustration 1 | g00802489 |
(1) Crankcase breather
(2) Tighten the two bolts for the housing for the crankcase breather to the following torque. ... 22 N·m (16 lb ft)
(3) Housing for the crankcase breather
Note: The breather assembly and the breather hose require periodic maintenance. Refer to Operation and Maintenance Manual, "Engine Crankcase Breather - Clean".
Caterpillar Information System:
3500B and 3500B High Displacement Generator Set Engines Starting Motor System (EMS II)
3406E and C15 Marine Engines Turbocharger - Install
G3304 and G3306 Engines Gas Shutoff Valve
SPT342 Truck Mounted Pumper Starting the Engine
SPT342 Truck Mounted Pumper Before Starting Engine
Wabco Air Compressors No Compression of Air (Unloaded)
3034 Industrial Engine Breather Deflector
3034 Marine Engine Engine Oil Cooler
G3600 Engines Engine Governing - Adjust
G3600 Engines Cylinder Liner
Wabco Air Compressors Operation of the Air Compressor
3500B and 3500B High Displacement Generator Set Engines Emergency Stop Switch (EMS II)
2001/06/01 New Software Is Available For The Engines That Follow {7620}
2001/06/01 Electronic Control Modules and Computer Viruses {7620}
3456 Generator Sets Caterpillar Monitoring System
3046 Engine for Caterpillar Built Machines Valve Depth - Inspect
Wabco Air Compressors Air Compressor Cycles Constantly
3034 Marine Engine Valve Guide - Inspect
3406E and 3456 Generator Set Engines Engine Design
Wabco Air Compressors Air Compressor Fails to Unload
G3600 Engines Electronic Control System Operation
G3600 Engines Electronic Control System Parameters
Wabco Air Compressors Air Compressor Leaks Oil
SPT342 Truck Mounted Pumper Reference Material