Turbocharger - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 5P-3931     | 防粘结剂     | -     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 安装新的衬垫和 O 形密封圈。
- 将弯头 (9) 安装到涡轮增压器 (8) 上。
Show/hide table
图 1 | g01160172 |
- 将适当的起吊设备连接到涡轮增压器 (8) 上。 涡轮增压器 (8) 的重量约为 43 kg (95 lb)。
Show/hide table
图 2 | g01160171 |
- 将工具 (A) 涂抹到排气歧管的螺柱上。 将涡轮增压器 (8) 放到位并安装螺母 (7) 。 拧紧螺母 (7) 至扭矩为 55 ± 9 N·m (41 ± 7 lb ft)。
- 安装板和螺栓 (6) 。
Show/hide table
图 3 | g01160170 |
- 连接管组件 (5) 。
Show/hide table
图 4 | g01160169 |
- 安装管组件 (4) 。
- 安装板和螺栓 (2) 。
Show/hide table
图 5 | g00802225 |
- 连接管组件 (3) 和管组件 (1) 。
Caterpillar Information System:
G3304 and G3306 Engines Gas Shutoff Valve
SPT342 Truck Mounted Pumper Starting the Engine
SPT342 Truck Mounted Pumper Before Starting Engine
Wabco Air Compressors No Compression of Air (Unloaded)
3034 Industrial Engine Breather Deflector
3034 Marine Engine Engine Oil Cooler
G3600 Engines Engine Governing - Adjust
G3600 Engines Cylinder Liner
Wabco Air Compressors Operation of the Air Compressor
3500B and 3500B High Displacement Generator Set Engines Emergency Stop Switch (EMS II)
G3600 Engines Ignition System
G3304 and G3306 Engines Engine Speed Sensor
3500B and 3500B High Displacement Generator Set Engines Starting Motor System (EMS II)
3034 Marine Engine Crankcase Breather
2001/06/01 New Software Is Available For The Engines That Follow {7620}
2001/06/01 Electronic Control Modules and Computer Viruses {7620}
3456 Generator Sets Caterpillar Monitoring System
3046 Engine for Caterpillar Built Machines Valve Depth - Inspect
Wabco Air Compressors Air Compressor Cycles Constantly
3034 Marine Engine Valve Guide - Inspect
3406E and 3456 Generator Set Engines Engine Design
Wabco Air Compressors Air Compressor Fails to Unload
G3600 Engines Electronic Control System Operation
G3600 Engines Electronic Control System Parameters