M316C Excavator Machine System Caterpillar


Fuel Lines

Usage:

M316C BDX



Illustration 1g03421126

Right side view

Table 1
Specification for 186-0502 Fuel Lines Gp    
Item     Qty     Part     Specification Description    
1     1     214-8999 Fuel Tube     Torque to
9 to 11 N·m (80 to 97 lb in).    
2     4     270-9433 Bolt     Torque to
9 to 10 N·m (80 to 89 lb in).    

Caterpillar Information System:

M316C Excavator Machine System Swing Motor Lines
M316C Excavator Machine System Pilot Lines
M316C Excavator Machine System Pilot Lines
M316C Excavator Machine System Pilot Lines
794 AC Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
794 AC Off-Highway Truck Frame and Body - Inspect
794 AC Off-Highway Truck Engine Air Precleaner - Clean
794 AC Off-Highway Truck Cab Air Filter - Clean/Replace
Installation of the 390-1561 Front Lines Gp on Certain Excavators{5057} Installation of the 390-1561 Front Lines Gp on Certain Excavators{5057}
794 AC Off-Highway Truck Automatic Lubrication Reservoir - Fill
349F and 352F Excavators Switch Circuits - Test
349F and 352F Excavators Window Wiper Delay - Test
349F and 352F Excavator Machine System Wiring Harness (Open Circuit) - Test
349F and 352F Excavator Machine System Wiring Harness (Short Circuit) - Test
349F and 352F Excavators Solenoid Valve (Switch Controlled) - Test
349F and 352F Excavators Engine Supplement Temperature Sensor (Catalyst Inlet) - Remove and Install
349F and 352F Excavators Solenoid Valve - Test
349F and 352F Excavators Parking
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Jaw - Assemble - Universal Jaw
794 AC Off-Highway Truck Bearing (Power Generator) - Lubricate
794 AC Off-Highway Truck Cover (Coupler Adapter) - Clean/Inspect
349F and 352F Excavators Engine Supplement Pressure Sensor (DPF) - Remove and Install
794 AC Off-Highway Truck Electric Motor (Wheel Traction) - Inspect/Test
794 AC Off-Highway Truck Engine Air Filter Secondary Element - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.