Hydraulic Tank and Filter
Show/hide table
Illustration 1 | g03419878 |
Show/hide table
Specification for 197-0370 Hydraulic Tank Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 4     | 8U-5056 Stud     | Before assembly, apply red Loctite 271 to the threads.     |
2     | 2     | 236-5300 Special Bolt     | Torque to 8 ± 1 N·m (71 ± 9 lb in).     |
3     | 1     | 196-5651 Liquid Level Switch     | Before assembly, apply Loctite 542 or 5P-3413 Pipe Sealant to the threads. During assembly ensure that the arrows on the level switch point downwards.     |
4     | 1     | -     | Tighten the nut to 2.5 ± 0.5 N·m (22.1 ± 4.4 lb in).     |
5     | 1     | -     | Tighten the nut to 80 ± 2 N·m (59 ± 1 lb ft).     |
6     | 1     | 118-7226 Temperature Sensor Gp     | Torque to 20 ± 5 N·m (177 ± 44 lb in).     |
7     | 1     | 5W-2585 Manual Valve     | Before assembly, apply Loctite 542 or 5P-3413 Pipe Sealant to the threads.     |
Caterpillar Information System:
794 AC Off-Highway Truck Air Conditioner Filter - Clean
2013/08/23 Low Engine Oil Pressure Issues, Oil Pump Failures for C9 and C9.3 Machine Engines {1304, 1315}
Product LinkTM PL421 Installation Quick Reference Guide{7606} Product LinkTM PL421 Installation Quick Reference Guide{7606}
336F XE Excavator Machine System Swing Bearing Movement - Measure
Air Conditioning and Heating R134a for All Caterpillar Machines Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
M316C Excavator Machine System Stick Cylinder Lines
M316C Excavator Machine System Stick Cylinder Lines
M316C Excavator Machine System Boom Cylinder Lines
M316C Excavator Machine System Muffler
R1600H Load Haul Dump Power Train Speed Sensor (Torque Converter Output)
349F and 352F Excavators Engine Supplement Flame Detection Temperature Sensor - Remove and Install
M316C Excavator Machine System Hydraulic Fan Drive Lines
M316C Excavator Machine System Pilot Lines
M316C Excavator Machine System Pilot Lines
Procedure to Rework the Ground Harness for the Display Panel and Fuel Sender for 307E Mini Hydraulic Excavators{1408} Procedure to Rework the Ground Harness for the Display Panel and Fuel Sender for 307E Mini Hydraulic Excavators{1408}
2013/08/19 New Software Is Now Available For All Cat® Products With PL522 China System {7606, 7620}
PM620 and PM622 Cold Planer Slope Operation
Steering Column Difficult or Unable to Adjust on Certain M300D Wheeled Excavators{4310} Steering Column Difficult or Unable to Adjust on Certain M300D Wheeled Excavators{4310}
349F and 352F Excavators Window Wiper Delay - Test
349F and 352F Excavators Switch Circuits - Test
794 AC Off-Highway Truck Automatic Lubrication Reservoir - Fill
Installation of the 390-1561 Front Lines Gp on Certain Excavators{5057} Installation of the 390-1561 Front Lines Gp on Certain Excavators{5057}
794 AC Off-Highway Truck Cab Air Filter - Clean/Replace