C7.1 Industrial Engine Caterpillar


Diesel Exhaust Fluid Module - Disassemble

Usage:

C7.1 881

拆解步骤

开始:

  1. 拆下柴油机排气处理液管路。 有关正确步骤,请参阅拆解和装配, "柴油机排气处理液管路 - 拆卸和安装"。
  2. 拆下电压负载保护模块。 有关正确步骤,请参阅拆解和装配, "电压负载保护模块 - 拆卸和安装"。
  3. 拆下电子控制(柴油机排气处理液)。 有关正确步骤,请参阅拆解和装配, "电子控制(柴油机排气处理液)- 拆卸和安装"。
  4. 拆下歧管(DEF 加热器)。 有关正确步骤,请参阅拆解和装配, "歧管(DEF 加热器)- 拆卸和安装"。
  5. 拆下电磁阀(DEF 加热器冷却液)。 有关正确步骤,请参阅拆解和装配, "电磁阀(DEF 加热器冷却液)- 拆卸和安装"。


注意

在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。

按照本地法规和指令处置所有液体。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. 将蓄电池断路开关转到断开位置。



    图 1g03421223

  1. 将线束组件 (5) 从继电器 (3) 上断开。

  1. 将线束组件 (6) 从继电器 (4) 上断开。

  1. 将螺栓 (1) 从继电器 (3) 上拆下。 将继电器从支架上拆下。

  1. 将螺栓 (2) 从继电器 (4) 上拆下。 将继电器从支架上拆下。



    图 2g03421235

  1. 在线束组件 (9) 上作临时标记,以便于安装。

  1. 作临时标记,以显示所有电缆扎带的位置,以便于安装。 将电缆扎带 (7) 和 (8) 从线束组件 (9) 上切断。

  1. 将线束组件 (9) 从支架上拆下。

  1. 拆下柴油机排气处理液泵 (10) 。 有关正确步骤,请参阅拆解和装配, "柴油机排气处理液泵 - 拆卸和安装"。



    图 3g03421327

  1. 将螺栓 (13) 从支架 (12) 上拆下。

  1. 将支架 (12) 从支架 (11) 上拆下。



    图 4g03421330

  1. 将螺栓 (15) 从支架 (11) 上拆下。

  1. 将支架 (11) 从罐 (16) 上拆下。

  1. 如有必要,将加注口盖 (14) 从罐 (16) 上拆下。 部分应用上可能采用其他类型的加注口盖。 有关正确的拆卸步骤,请参阅原始设备制造商 (OEM) 信息。

Caterpillar Information System:

M312 Excavator Machine System Travel Motor and Mounting
M312 Excavator Machine System Muffler
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
M312 Excavator Machine System Operator Platform
M312 Excavator Machine System Control Valve (Blade)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Main Hydraulic Pump
M312 Excavator Machine System Joystick Control
M312 Excavator Machine System Frame (Undercarriage)
H35E S, H35 S, H45E S, H45S, H55E S, H55S, H65E S and H65S Hydraulic Hammers Hydraulic Hammer
326F, 329F and 330F Excavators C7.1 Engine Supplement Exhaust Elbow - Remove and Install
326F, 329F and 330F Excavators C7.1 Engine Supplement Soot Sensor - Remove and Install
349F and 352F Excavators Hydraulic System Travel Hydraulic System
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Assemble
M312 Excavator Machine System Control Valve (Main)
2013/12/03 Improved Stick Cylinder is Available for 302.5C Mini Hydraulic Excavators {5458}
A New Seal Kit is Now Available for the Stick Cylinder for Certain 325D, 328D, and 329D Excavators {5458} A New Seal Kit is Now Available for the Stick Cylinder for Certain 325D, 328D, and 329D Excavators {5458}
986H Wheel Loader Machine Systems Antenna
326F, 329F and 330F Excavators C7.1 Engine Supplement Fuel Cooler - Remove and Install
C7.1 Engines NOx Conversion Is Low
986H Wheel Loader Machine Systems Antenna
326F, 329F and 330F Excavators C7.1 Engine Supplement Fuel Filter and Base - Remove and Install
336D2 and 340D2 Excavators Hydraulic System Oil - Change
415F2 Backhoe Loader Alternate Exit
2013/07/25 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.