H35E S, H35 S, H45E S, H45S, H55E S, H55S, H65E S and H65S Hydraulic Hammers Caterpillar

Hydraulic Hammer

Usage:

Show/hide table




Illustration 1	g03408096

Show/hide table

Table 1
Specification for 415-1113 Hydraulic Hammer Gp
Item	Qty	Part	Specification description
1	2	442-4706 Seal	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed.
2	2	148-8395 Plug As	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed. Apply purple Anaerobic Thread Sealant to threads.
3	2	355-3779 Plug	Torque to 16.0 ± 1.5 N·m (141.6 ± 13.3 lb in).
4	2	3J-7354 O-Ring Seal	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed.
5	4	353-1660 Bolt	Coat the bolt threads and under head area with Loctite C5A cooper anti-seize compound.
5	4	353-1660 Bolt	Tighten the four bolts in two stages. Tighten the bolts in a cross pattern: 1. Torque to 250 N·m (184 lb ft). 2. Torque to 800 N·m (590 lb ft).
6	3	148-8409 Plug As	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed. Apply purple Anaerobic Thread Sealant to threads.
7	6	162-0177 Plug As	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed. Apply purple Anaerobic Thread Sealant to threads.
8	2	1H-6227 O-Ring Seal	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed.
9	1	415-1123 Seal Carrier	During assembly, coat lightly with lubricant.
10	1	432-2052 U-Cup Seal	Before assembly, soak piston seals in warm hydraulic oil. During assembly, maintain the temperature of 38 ± 5 °C (100 ± 41 °F).
11	1	432-1974 U-Cup Seal	Before assembly, soak piston seals in warm hydraulic oil. During assembly, maintain the temperature of 38 ± 5 °C (100 ± 41 °F).
12	1	432-2042 Buffer Seal As	Before assembly, soak piston seals in warm hydraulic oil. During assembly, maintain the temperature of 38 ± 5 °C (100 ± 41 °F).
13	1	419-8266 Distributor	During assembly, coat lightly with lubricant.
14	1	417-8929 Diaphragm	During assembly, coat lightly with lubricant.
15	1	415-1136 Piston	During assembly, coat lightly with lubricant. Before assembly, fill lifting eye with hydraulic oil.
16	1	417-8945 Pin As	Coat the pin assembly with Loctite C5A cooper anti-seize compound.
17	1	432-2068 U-Cup Seal	Before assembly, soak piston seals in warm hydraulic oil. During assembly, maintain the temperature of 38 ± 5 °C (100 ± 41 °F).
18	1	432-2098 Wiper Seal	Before assembly, soak piston seals in warm hydraulic oil. During assembly, maintain the temperature of 38 ± 5 °C (100 ± 41 °F).
19	1	419-7168 Sleeve	During assembly, coat outside of sleeve lightly with lubricant.
20	1	2H-4145 O-Ring Seal	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed.
21	1	417-8944 Bushing	Coat the outside of bushing in front head with Loctite C5A cooper anti-seize compound.
22	1	8T-5049 O-Ring Seal	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed.
23	1	432-2104 U-Cup Seal	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed.
24	1	432-2138 Wiper Seal	Lubricate the seal and sealing lip lightly with the hydraulic oil lubricant that is being sealed.