Swing Drive
Show/hide table
 | |
| Illustration 1 | g02876979 |
Show/hide table
| Specification for 389-2306 Swing Drive Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 188-4061 Spring | Free length is 36.7 mm (1.44 inch). |
| 2 | 2 | 188-4060 Plug | Torque to 157 ± 10 N·m (116 ± 7 lb ft). |
| 3 | 2 | 389-2315 Valve As | Torque to 373 ± 20 N·m (275 ± 15 lb ft). |
| 4 | 8 | 095-9805 Bolt | Torque to 177 ± 10 N·m (131 ± 7 lb ft). |
| 5 | 1 | 139-7336 Plug | Torque to 22.6 ± 1.0 N·m (200.0 ± 8.9 lb in). |
| 6 | Use any one of the following plates: | ||
| 1 | 171-9446 Plate | Thickness is 1.8 mm (0.07 inch). |
|
| 1 | 171-9447 Plate | Thickness is 2.3 mm (0.09 inch). |
|
| 1 | 171-9448 Plate | Thickness is 2.8 mm (0.11 inch). |
|
| 7 | 1 | 279-4706 Plug | Torque to 22.6 ± 1.0 N·m (200.0 ± 8.9 lb in). |
| 8 | 3 | 139-7308 Plug | Torque to 15.7 ± 0.8 N·m (139.0 ± 7.1 lb in). |
| 9 | 1 | 137-3688 Orifice | Torque to 2.45 ± 0.49 N·m (21.68 ± 4.34 lb in). |
| 10 | 4 | 5W-1341 Bolt | Torque to 24.5 ± 4.9 N·m (216.8 ± 43.4 lb in). |
| 11 | 12 | 188-4054 Spring | Free length is 21.1 mm (0.83 inch). |
| 12 | 8 | 188-4055 Spring | Free length is 18.4 mm (0.72 inch). |
Caterpillar Information System:
2012/02/15 Improved Routing for the Battery Cable Assembly is Now Used on Certain 345D and 349D Excavators {1401, 1402, 1408}
308E CR Mini Hydraulic Excavator Machine System Specifications Swing Motor Lines
308E2 CR and 308E2 SR Mini Hydraulic Excavators Machine System Specifications Bucket Cylinder
308E2 CR Mini Hydraulic Excavator Machine System Specifications Stick Cylinder
CD44B and CD54B Vibratory Asphalt Compactors Propel System Piston Motor (Drum Propel) - Solid Drum
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Assemble
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Machine Systems System Pressure - Release
318E Excavator Systems Pilot System
320D Excavator Machine Systems Final Drive - Assemble
318E Excavator Systems Main Hydraulic System
Installation Procedure for the 384-2317 Coupler Control Arrangement {6129} Installation Procedure for the 384-2317 Coupler Control Arrangement {6129}
300.9D VPS Mini Hydraulic Excavator Machine Systems Cylinder Drift - Check
Product Identification Numbers (PIN) Location Guide Integrated Toolcarrier
308E CR Mini Hydraulic Excavator Machine System Specifications Swing Drive Mounting
318E Excavator Systems Solenoid Valve (Proportional Reducing) - Power Shift System
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Eccentric Weight
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
314E Excavator Leaving the Machine
314E Excavator Access Door and Cover Locations
318E Excavator Systems Main Control Valve
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Fuel System
Procedure to Add the Return Filter onto the 320D L Equipped with a Hammer Application{1408, 5057, 7490} Procedure to Add the Return Filter onto the 320D L Equipped with a Hammer Application{1408, 5057, 7490}
318E Excavator Systems Negative Flow Control System
2012/06/12 New Adapters Are Now Available to Replace Shutoff Valves for the Cab Heater Lines on Certain 324D to 390D and 324E to 349E Excavators and Mobile Hydraulic Power Units {1808}